Find a local electronics repairer in Melbourne City CBD

Could you help with replacing one of the 3.5 connector, like the one showing in the photo? The original one is for connecting steering wheel control and is broken somehow. Headunit will be pulled out, ready for work. Please help with disassembling the headunit, replacing the connector, assembling the headunit.

Broken Sony xm 5 Broken left side hinge

basin taps are loose and need refitting tighten, maintenance check for wear on hoses, quote to replace shower set up to go from ceiling rose only to have hand held as well. Make both cistern single into dual taps

Remove and install new: 1) wood bench top in kitchen 2) stone bench top in kitchen 3) stone vanity in bathroom Materials provided. Some may need to be cut to size.

I need: 1. A door handle changed over to a new one. The new handle will be supplied (pictured) and just requires two holes to be drilled in the correct place. 2. Two small door stops installed on the skirting board for internal doors (these will be supplied and just require a single hole to be drilled in the correct place). 3. Two clothes racks (will be supplied, see picture) to be mounted on a bathroom plaster wall (not tiles). I want to make sure this is done securely, i.e. to the studs, or whatever is the best way to do this. I also have a number of other jobs/carpentry items that I would like some advice/to be quoted on separately, like installing some shelving in a cupboard, putting a trim on some external windows and mounting some other items on the walls. The job is in CBD Melbourne. Happy to adjust the price if additional tools or time are required, as I want to make sure everything is done well.

Moving out of rental and need some damages to walls filled, sanded and painted. Colour - off white (colour match) • Bedroom wall where I have removed TV bracket - needing filled, sanded & painted • various other patches that I have filled that need sanding and painting • doorframe damage that needs filling and painting ASAP

I have 3 x Clipsal Iconic USB-C GPOs for installation into the kitchen pantries of 3 separate but immediately adjacent apartments in Melbourne's CBD (near Queen/Londsale Street). The existing GPO cavities are built into the backs of wooden pantries (see picture) which will need to be just slightly enlarged with a renovator tool or similar in order to accommodate the new Clipsal units as they are slightly wider/taller. Am very flexible in terms of day/timing. Can provide access to the 3 flats for what should be a relatively quick job. No parking on site but on-street or paid parking available nearby on Queen Street or Lonsdale Street.

Rotel RA1520 Amp needs repairing with sound knob that is off the switch. Also makes a noise when connected to internal system. Would need someone to wire them to the speakers too so we can check the system properly.

I just moved to a new property (2 bedrooms, 2 bathrooms) that has gaps and cracks requiring professional filling and sealing. The location of the gaps are listed below: - Some Edge of the floors - Kitchen bench, wardrobes - Behind the toilets

It keeps flashing and beeping

Supply and install taps in shower and basin - View all the details of this offer: https://www.airtasker.com/offers/01JNJZJJ0J9ZT8M3RHMHBSAVRZ

Pls Don’t look at budget its for getting in touch purposes . led works on bar hood and ceiling and pillars that needs to be controlled with Madrix software (existing) or other commercial software for light effects. Must have previous experience in install and programming of led and moving heads. Led strip 28xx series or per led programmable strips , I have multiple 500w dc power supplies and led diffusers tubes that needs to be installed as well. Budget is added for discussion final will be when u are onsite with me .

Two new pendant lamps with existing placements on the ceiling and switches

My DJI Mavic Air has an IMU error that I need fixed

Table tops need bases drilled and screwed. They need to be measured to the centre of the bases as there are no pilot holes. There are 4 table tops to be replaced.

I need maintenance on our Epson projector, the model is E8- G7500U. - It has a loud fan noise - Status and Lamp light constantly flashing - the lamp was replaced 6 months ago

Ghd straightener beep and go red light

Bathroom taps and icb container hook up, rainwater diversion

Jumpstart elizabeth street

Need quote for touchups and fixing around 30 -35 dents , patched and nail holes I don’t have paint so please include price with your own paint