Find a fence installation professional in Inner South West Sydney

I have colorbond fence it is quite difficult on windy days. Need to change to different kind which is not affected by Windy. I put a sample made out of Steel. I am open to other options. Length is approx 2.4. Height 1.8m

1.remove and dispose existing timber fence 2. Install new green colorbond fencing 3. 1x Colorbond gate

Fix one side of a barrier fence to the rendered wall and another barrier fence to the colour bond fence. Install retractable fence at the bottom of the stairs

Side gate has fallen and require a new gate to be installed. Distance between fence and house is approx 1.6m I do have a spare side gate not sure if it will work or missing parts.

Need to install 3x supplied post like existing, to pergola Will need to be concreted and bolted. All materials will be supplied

-Installation only of sliding gate/fence -I have already purchased the gate etc. with all components -See attached image for plan -Dig holes for the 5 posts (approx. 600mm deep) -Supply concrete bags for posts/gravel -Include removal/disposal of hedges and stone columns (see attached) -Include installation of concrete slab for gate to slide on over mulch (see attached) -Install gate motor with remotes working Looking for a complete installation from start to finish with nothing left to do. Looking for a good job by someone who has experience

I have 2 side boundaries and rear boundary that have colorbond fences. There is a gap at the bottom of them allowing for neighbouring grass and weeds to grow through. I require the supply and install of: Insert treated timber plinths directly beneath the fence panels to close the gap and to ensure that weeds and grass cannot grow under from the neighbouring properties. The length is approximately 30metres and rear boundary is approximately 15metres.

I have a house that has a side alley that leads straight to the backyard. I don't want my dogs to poo at the backyard so I want to install a fence on the side of the house to prevent the dogs from pooing in the backyard. Need someone who is skilled at installing fences, just let me know what materials required at bunnings and will purchase them. The width of the fence is approx 2 metres.

The current gate is a green wooden one in the first photo. Need to be replaced by a steel one similar to the one in the second photo.

Approx 150m of fence on top of sleepers. I’ll buy material. Need experienced labour/installer

I need a glazier or pool fencing person to uninstall the pool glass fences and place them somewhere securely (on premise). then come back about two weeks later to reinstall them back in. I m just redoing my garden and pool tiles so we need them temporarily removed. This includes 1) removing the glass fence and the legs 2) securely reinstalling the glass fence and ensuring the rubber seals and legs are properly installed. Also the locks are properly working and can lock. you will have to come on two separate occasions but should be a quick job. total 11 panels (pls see photos) please quote fixed price

Need a 3 section colourbond fence installed and gate. Have the fence already. Gate will need to be built from the extra parts that I have.

Supply and Install 6.5 m length and 1.5m height colorbond with door installed on concrete driveaway. Need matching color to existing.

Install supplied 88x88 post concreted into floor Will require to dig for post Supplied products -Concrete -3x 88x88 treated post - 180mm bolts and nuts

Dismantle & Take away old colourbond fencing ,do 7 new coredrills into concrete, supply & install 14.4m (6panels) new primrose colourbond fence panels, rails & posts plus 1 extra core drill & 2 posts. Regards George

Looking for a qualified and licensed builder with insurance to build a new brick fence with metal slate Scope of work: -New brick fence with metal slats approx 1.5m height (flush/flat) 18m width -Automated sliding gate -Pedestrian gate and mailbox -Removal of hedges/ plants including cleaning up and disposal of the hedges/ plants and rubbish -New side color bond fence approx 1.8m height, 7m width -New side color bond fence approx 1.8m height, 5m width -Color bond gate replacement with door access approx 1.8m height, 2.5m width -Brick is to match the existing house -Supply and install -Price including GST Make me an offer

I need to install (from scratch) a small backyard gate between the house wall and the timber fence. The gap is about 125 cm. Probably the installation of some sort of pillars will be needed. I would prefer the gate's design shown in the photo

Rebuild the brick fence in the front

We have two outdoor gates that need replacing. I would like them to be treated timber in a simple picket arch with a Z frame reinforcing the back. They will also need to be attached to the wall with hinges and latches. Gate sizes: Side garden gate 97 width // height approx 157cm https://www.bunnings.com.au/900-x-1800mm-gate-cypress-arch_p0124921 Pool gate Width 83cm // height approx 140cm There are prefab ones at Bunnings for $148 that will suit the larger size, but not the smaller. The smaller will have to be built or perhaps we can cut another Bunnings one to size. Will need you to purchase materials after we discuss design, build gates and install.

Doing landscaping in backyard we dug up what seems to be old cement cheeting and some steel posts, 12m long and probably just under 1m high, looming for someone to cut the material the ground level and remove it