Find experienced local fencing contractors in North Perth

Removal of Cream Colour Bond fence 4 x Panels

As per picture New aluminium gate with wood-look slats was fixed to old aluminium posts but one of the posts has no footing (just screwed to decking joists) Need post replaced, including a small concrete footing

I have a white picket fence at the front of my house. Unfortunately there’s two issues with it: 1. Three of the posts have rotted out at the ground surface (including the two on either side of the gate); and 2. I think the gate we have is made of hardwood and is very heavy, which has caused the post bearing the weight to split. Subject to your thoughts, the rest of the fence is still in good nick (though needs a paint!). Looking for someone to 1. Replace the posts, which could either be new posts or stirrups or similar; and 2. Options for a lighter gate (eg pine or something) to avoid this happening in the future. Can increase budget to cover materials/ requirements!

Merbau fence panel were originally attached to the colorbond fence, but the merbau has become detached and sunk in one section. The merbau needs to be removed, and then reattached with a fresh panel of wood behind it. - Due date: Flexible

Replacement of existing equipment only 3 panels (with min 400w panels) need to be replaced. I can supply panels and inverter or if you can let me know. Installation of a Growatt inverter - Due date: Flexible

Hi. I need 6 wooden lattice panels to be attached to a hardifence. The panels are cut. Just needs someone to attach/screw them into the fence behind them. Access is tricky as they’re behind some trees and I don’t have access to the other side of the fence. Thanks. - Due date: Flexible

This task is to repair and move side gate. 1. Reattach loose paling with new screws 2. Dettach gate from wall, and rehang into brick wall to align with new fence post. 3. The gate is approx 20 or 30mm too narrow. Please add some pine trim so the gate ‘reaches’ the pine post. 4. Install latch (supplied) Please bring some treated pine which you can add as trim to ‘widen’ gate. Cheers :) - Due date: Before Sunday, 9 April 2023

Hi I need a 10m pool fence supplied and installed. From one end to the other, parallel. Willing to pay a bit more - Due date: Before Tuesday, 24 January 2023

supply & install approx 3 metres x 700 high of lattice type privacy screen to existing fence - Due date: Before Thursday, 15 December 2022

Post clean of a new build - Due date: Needs to be done on Tuesday, 30 August 2022

I would like fencing and two gates installed at the back and sides. Some poles would need to be fixed into the ground for posts. A section of brick paving needs to be removed for the fence and gate feet, and then bricks replaced. I will supply all materials, but have limited tools.

Our small merbau fence has dropped and needs to be put back on brackets. Looking for a professional chippie or fence guy

Metal fencing brace has weakens and starting to come of the brick fencing. Needing to secure the bracket

10 feet by 6 feet colourbind fence. (1 panel and 1 gate section. Dismantle and dispose. Replace the pavers (where the legs have been. (we have the pavers).

I need someone handy that is able to do a good job fixing my fence (or replacing it if really needed). Ideally a gate installed.

I need to make my fence dog proof. It needs pulling up and securing. And I need a solution for the "entrance" so that it can be closed and opened.

Build and install a wooden frame to hang mesh for vertical garden. 1. Build wooden frame 2 install into ground with cement 3 attach mesh to the frame 4. Attach existing irrigation to the frame. You will need tools including post hole digger. I will provide the materials. Can have a chat first before I buy the materials. Measurements 1800mm wide x 1200mm high

Require set of double gates to be installed along fence line. Already have gates. Existing hardiefence will be removed and gate post with hinges to be installed. Gates are 3.1mx1.5m. Posts and hinges can be supplied (to be discussed). Cement is not supplied. See photos