Find experienced local fencing contractors in Summer Hill

Rear garden fence is leaning over due to small fig tree. Tree now removed and fence posts need a re pour of concrete or stakes to support and straighten. Fence is classic double Pailing and is 1.8m high with a 400mm lattice topping 3-4 posts will need stabilising and 1-2 2m lengths of lattice will need replacing as they have broken. Lean is very slight say 10-15 degrees Total length of fence is 15m but leaning component is 3-4 metres OFFER INCLUDES MATERIALS

Two sections of wooden pailing fence to be supplied to prevent our toddler running on road where currently railing is low. Need 2 x 3.6m long and approx 90cm tall. Pailings with approx 4cm gap (similar to existing fence) but can be slightly different if that’s cheaper to supply. Don’t require painting. Thank you!

I would like to turn part of my courtyard fence into a hinged gate

See photos attached: 1) Removal of wood palings 2)Cut down steel fence into pieces with an angle grinder (you will need to provide the angle grinder) 3) These items to be placed in a skip bin which we will order Fence length: approx 7.5m; Fence height: approx 2.33m

1. Take down 11m of timber face on 14th or 15th of January and take away 2. Come back on 16th of January and replace same type of fencing (as pictured). Install 1 lockable single gate with double sided lock. Dates are not negotiable as they are necessary for another job.

Demolition and Removal of old timber fence Build new timber fence 7.5mx1.8m Treated Pine, Single Pailing , Metal Post, 3 Panel of Lattice

I’m looking for a carpenter to build a front yard picket fence on my property. Details as follows: - standard picket wooden fence 1.2m high (with 1.5m allowance for slope, I’d like the fence as high as possible). - Length of fence just under 6m - 1 x pathway/front door gate - 1 x driveway access swing gate (Pinter hinges or similar so gate swings both ways). - 1 x letter box next to gate - 1 x concrete or brick hob to allow for slope and posts I can either source materials or if you are able to please specify this in your quotation. Third picture is an example of how I’d like the finished product to look.

Discuss and estimate a fence job. Budget $1000. See diagram. Yellow line for new fence and gate. Can be any material. Ideally some kind of durable metal.

There is one full length of palings approx 2.4m and then 4 or 5 palings that need attention. Further to that the corner post needs repair as it has been damaged. I have images and can arrange a site visit if you can quote on the job.

We need a hole in a timber fence fixed. - Due date: Must be done asap

Take away hardwood posts and pieces of lattice Take to tip or use yourself in projects Pick up Summer Hill - Due date: Needs to be done on Monday, 13 March 2023

Build an internal fence to separate two sides if internal yard Please come have a look and give me a quote - Due date: Flexible

Remove old fence and supply install New one. About 30m - Due date: Flexible

Approx length 10m, height 1.75m Please include fence licence number if you have one. - Due date: Flexible

approx 22m x 6ft +1 high 8ft approx panel + complete removal of old fence note old palings for removal are double amount (ie palinged both sides) - Due date: Flexible

9 x 1200 x 1300 panels 3 x 1200 x 900 panels Gate panel - Due date: Before Friday, 5 August 2022

Remove old lattic, replace with new lattice which we have bough onto of fence with new supports 2 x 2 4m pieces.

Remove and install timber fence. Required concrete sleepers under fence.