Find a professional gate installation in Balwyn North

top hinge is broken and needs to be welded back in place

Needing a side fence approximately 31m long. Part of the fence has a retaining wall that needs a tidy up. I would like trellis on part of the hence and capping on the remainder. The fence that is in our backyard I would like higher than standards and as it meets the st at the front allot lower as pictured. If you’re able to install gates that will be ideal. Wanting preferably white PVC colonial style gates. Job is in North Balwyn. Happy for you to come out and quote appropriately. Welcome to quote by the metre. Prefer job to be quoted after inspection.

The logic board needs replacing on my electric gates. The gates are genius gates.

We have a wooden gate that is facing a pool. The gate has a spring closure device however the gate is no longer self closing as the spring has lost tension. The gate spring needs to be either pretensioned or replaced.

To pick up a 3.15 x 1.85 metre steel electric fence form Balwyn North and delivered to Moonee Ponds

I need the gate removed and taken to another location and installed.

Aluminum gate supply and installation

Project: Indoor Pet Shop Safety Gate Fence** Location: Balwyn North Safety Gate Dimensions: - Length: 150cm - Height: 120cm Material Options: 1. Wood 2. Iron Details: Please refer to the attached design drawings for specific requirements. Quotation Requirements: 1. Cost breakdown for wood and iron options. 2. Estimated delivery time. 3. Any additional recommendations for the proposed materials. Thank you. - Due date: Before Friday, 5 January 2024

Glass pool fence gate needs repair so ot closes gently to comply with pool regulations - Due date: Before Friday, 8 December 2023

I have electric gates that developed what appears to be an electronic fault. Both sides of the gates are working and receiving commands of the remote control. The issue is that when the gates open, sometimes they work fine and sometimes they move for a while and then just stop in the middle of the expected range of movement. A gate specialist looked at the gates about a year ago and replaced contact switches. It seems that the gates worked better for a while but lately started to develop the fault again. I don’t know whether it was the new switches that helped or just cleaning the contacts. Please see attached photographs for the picture of the gates. The left-hand gate is shown in the position where it usually stops by itself. Can you please send me the amount you charge as a callout fee, and what it includes. Regards, Michael - Due date: Flexible

The swing gate could not be closed. - Due date: Flexible

Hinge on side gate has detached, needs rescrewing or replacing - Due date: 19/4

Replace Swing Gate Motors - Due date: Flexible

Our side gate is sagging - mainly due to the timber post leaning. Would like it fixed up so the gate and latch work properly. - Due date: Flexible

the bottom front gate hinge rusted and broken off the gate. The hinge will need to be replaced or re-welded again. Might be easier to just replace the whole hinge. Top hinge still working. - Due date: Flexible

Source gate motor and replace and install new motor to automatic gate - Due date: Flexible

Need quotes on two sliding gates and front entrance gate - Due date: Flexible

Hinge on side gate is broken and needs replacing, also gate itself needs reinforcement as some vertical panels are loose - Due date: Flexible

We need self closing hinges replaced on our existing aluminium pool gate and new hinges that are self closing installed on a timber frame side gate. Job must be completed by 4th June. Happy to buy materials and you quote labour ... or quote for materials and labour. Location is in North Balwyn, 3104.

everlasting iron works gate repair, cannot close with remote control time flexible, just need to make it fixed