Find a professional gate installation in Mornington Peninsula

A quote for Connecting power lead from gate to power box and put lead underground

A couple of gate hinges need welding back up

Install reinforced concrete for driveway sliding gate track. Details: - track length is approx 8 metres - concrete to be 100mm deep - must be level - can sit 20-30mm below pathway level

3 baby gates to be installed. Bottom of stairs, top and in baby bedroom. Retractable baby gates.

Need my front fence and gates repaired. Post supporting main gates have deteriorated and need to be digged out, replaced with a new one (I already have new 120x120 replacement post) and gate needs be hanged back (I have replacement hinged). Please note: this post is concreted around - see photos. Another post, the one supporting pedestrian gate (also the 1st post supporting actual fence) has got rotten and wobbly. Needs to be replaced (I have new 75x125 post) and old pedestrian gate hanged back.

My kids forced the gate open manually which popped out one of the motors that is fixed to a metal plate on a brick pillar. Need someone to repair.

Need the current side gates replaced with easy to access gates with key locks at an easy height. One gate is 2700 wide x 1900 high, but would like to replaced with 2700 x 2100 high. The other gate is 1200 wide x 1900 high, but would like to replace with 1200 wide by 2100 high. Looking for metal solutions that do not need much maintenance and will not rust. Also want the gates to block wind (especially the larger gate), so must not be able to see through.

To make wooden garden gate wider and mount it on existing wooden poles (mounting/lock unit will be supplied). To replace 2 horizontal pickets with longer ones (pictured). To replace 1 diagonal picket with longer one (will be supplied). Screws are supplied.

Paint front gate and part of fence in the pictures. Will need to and buy paint too

25 sq m of 10cm thick exposed aggregate concrete

Help me fix my tailgate on my truck. Truck is pretty much brand new. And tail gate is unresponsive

Existing driveway gate post rotten and fallen on ground. Need it reinstalled and half the gate put on it. Then both realigned Or New driveway gate. Basic design fine.

Gate hinges require re-weld - 4x hinges

Installation of baby gate, needs screwing in to wall

I need the Merbu planks replaced on two of my gates and attach two stainless spring closers

We are pulling down our front fence as we sold it on marketplace. It’s getting picked up tomorrow (Friday 8th). Most of it’s uninstalled but needing help to get the last 4 posts out. There’s a fair bit of digging as the posts are set in deep. Will also required hammer drill to remove concrete from the base of posts

Two driveway swing gates 1.5 m wide each and 1.4 m high. Supply and install front driveway steel/ aluminium/ hardwood framed gates, Merbau slatted to match the front fence, including: two 200mm by 600mm post holes; supply and install two 50x50mm galvanised steel posts/ or hardwood posts set as close to the brick fence post and timber boundary fence as possible; supply and install 50x50mm galvanised steel caps on gate posts if needed; supply and install, two steel gate frames ( or timber frames) fixed in place with galvanised hex head 14G screws; supply and install 90mm by 19mm Merbau lengths to gate frame fixed in place with 35mm 8G countersunk galvanised screws; supply, install, align and test two 300mm galvanised drop bolts for both gate sides.

Need a basic gate at the front of my house in driveway. The width of the driveway is roughly 360cm, the height I'd like it to be is roughly 180cm I have a white timber fence so would need to somewhat match

Gate hinge has rusted off. We are after a welder to weld it back onto a new plate or whatever is best. In the photo part of the hinge is folded back but is there

Investigate leaking drilling tap - mixture - hot and cold in shower and replace if needed. Part cost to be confirmed - Due date: Needs to be done on Wednesday, 6 December 2023