Find a professional gate installation in Blackburn

Build 1 metre gate with 0.8 metre fence on each side

We need a small wooden fence built - 2.96 metres long x 1.8 metres high. It needs to have a gate, with a metal closing we can put a padlock on. It needs to go right to the ground so our dogs can’t go under it. It is on the side of our house and pretty close to the gas meter so we are thinking it might need to be attached to our house on one side (old wooden weatherboards) and a brick wall on the other side rather than having posts.

Five meters long sliding electric gate and height 1.5 meters plus manual middle gate 1.25 meters (W) by 1.5 meters (H).Street facing. there is brick pillar in between. material : Steel - Due date: Flexible

Broken garden gate hinge needs to be replaced Gate hinge is of the welded type so may need to be cut off and rewelded - Due date: Before Friday, 12 January 2024

Measurement 155 cm wide height 2.1Metre approx., This is side gate of the house. A sample gate pictur attached. - Due date: Before Wednesday, 20 December 2023

I would like to replace the chain link fence that been cut. Just on the gate. - Due date: Flexible

Go to a building and lock the gate with a combination lock on site. - Due date: Needs to be done on Wednesday, 16 August 2023

Our side gate post has rotted at the base so needs replacing - Due date: Flexible

I have a two story house. A small leak has appeared through the ceiling near the top of the second floor under very heavy rain. This is a new tiled roof, about 4 years old. Photo attached. - Due date: Flexible

Gates with metal frames and wooden slats are sagging and leaning into each other, the gate wont close well. Gates need to be adjusted/lifted - Due date: Flexible

I have the other part of latch, but if I install the other half directly onto the pillar, the angles won't align. Previously, I installed a wooden shim that was the same size as the picture in my hand. However, I don't have any tools to penetrate the iron pillar or to make another shim that is the same as the previous one. Therefore, I need someone to help me make a shim and install it, as I already have the previous latch and do not need a new one. - Due date: Flexible

a site door between the house and fence - Due date: Before Sunday, 5 February 2023

The gate needs to be repositioned to enable it to maintain compliance. - Due date: Flexible

3.9 Mtrs area for fence and gate to cover the side access to the backyard (location - between the house and the side fence) - Due date: Flexible

3 gates needing adjustment to open more easily. - one driveway swing gate needing minor alignment - gates to garden are sticking and need small adjustment - small side gate sticking and needs small adjustment - Due date: Before Friday, 25 November 2022

Seeking someone to come fix the sagging side gate and tighten the latch on the gate. The gate is slanted/out-of-alignment on one edge and gets stuck into the frame most of the time when closed. I’m asking this as a favour if anyone in the area - we’re at Goodwin St in Blackburn - is willing and able to help out in the meantime. - Due date: Before Monday, 7 November 2022

The pool gate attaches to the house. This connection has broken and needs to be repaired.. - Due date: Flexible

Re ganging a gate that got damaged - Due date: Flexible

Needs a carpenter to realign the back gates. - Due date: Needs to be done on Thursday, 30 June 2022

Reinstallation of wooden gates posts and re-hanging of wooden gates - Due date: Flexible