Find a professional gate installation in Carnegie

Please note i would like to get a quote for replacing the fence and gate seen in the image. The Fence might be approximately 5-6 meters or lesser from what i remember. Need to be fixed this week. You would need to bring the material and labour for finishing the job.

My auto swing gate is supported by a timber post which attached to brick by screws. However, the timber post started to detach from brick as it is weakening over time. I reckon the timber post needs to be replaced. The swing gate itself works fine.

The timber post of the side gate is cracked and the hinge is coming off. It may need half of the post cut and new part joined with the old and then fix the hinge of the door.

Change capacitor for gate motor. Have new capacitor

I have a gate that has a new remote and need it coded to the gate

Looking to make our gate electric by installing swing arms. There is power nearby to a carport light.

Gate keeps jamming on rail/ground and won’t open properly. I believe the hinges need replacing to metal/heavy duty hinges.

Front gate isn’t closing and locking, needs to be fixed

We have one small roof area that has gutter draining issues which caused a leak during a recent storm, and a bathroom which started leaking from the exhaust fan. Both roof areas are corrugated iron. We have work scheduled for the damage caused internally but need to fix the roof first and need qualified experienced roof plumbers to do the work. I am aware that the cost of repairs will depend on assessment of the problem and that the quoted cost could be either lower or higher. UPDATE: insurance evaluation has advised that we need a box gutter to be installed.

Hello, Looking to replace 2 x gates as follows: 1. Driveway gate. Looking for a metal sliding gate. Approx 4 metres wide x 1.2m high. Undecided if it will be auto or manual, See pic for example. 2. Side gate between house & fence line. Thinking of double gates with metal frame and timber slats (so it can be painted), Approx 2.85 metres wide x 1.9m high. See pic for example. Other pics are of existing cream coloured gates. Thanks.

I have a steel sliding gate that I have attached new cypress pickets to. It is to heavy now for my wife and I to get back on the rail. I need help moving it. - Due date: Needs to be done on Wednesday, 31 January 2024

#1 two metal gates have latch mechanisms that are broken. Best to replace with new. Please quote on labor - latch costs will be in addition. Please supply or recommend a latch that I can buy for the job. Please rekey latch lock so it matches existing house key. #x1 wooden gate that needs a simple latch install. #cut laserlite roof panel. This job is optional - depending on skills. Current laserlight roof panels sit too close to the gutter. This makes it impossible to clean the gutters. Can the edge of the fiberglass panels be cut (jigsaw) by 20-30mm. - Due date: Flexible

Lower square panel has come out and needs to be reattached (is taped on in photo). One or two other pieces are split and also could be replaced or fixed. - Due date: Flexible

I need a combination lock installed on my garden gate (lock has already been purchased). Work will also require removing existing latch. Instructions listed here: https://youtu.be/Q-KTb-foLkk?si=428c74YINXZIeo8G Due date: Flexible

Fence built and sliding electronic gates. - Due date: Needs to be done on Saturday, 30 September 2023

Iron welder Swing gate Repair - Due date: Before Tuesday, 15 August 2023

Need a retractable gate installed - Due date: Before Sunday, 16 July 2023

The door needs to be taken down The posts need to be replaced and reconnected to existing fencing The roll a door needs to be reinstalled I have no idea what the price might be - but had to put something. Tell me your price. - Due date: Before Friday, 30 June 2023

Looking to weld together driveway gates made up from 2 sets (left and right) old wrought iron gates. picture show right hand side - will need to do the same for both left and right. need to weld top gate onto bottom gate (to make the one unit). Also need to weld on bottom side, 4 hinges, and two small metal tabs (show in picture). I will be able to assist. All metal has been pre-cut and ready to weld. Looking for someone skilled in welding to do nice welds. many thanks - Due date: Needs to be done on Monday, 12 June 2023

I have an existing swinging GiBiDi automatic gate (at least 5 years old), it hit an object whilst opening and now the left one will not open. When dismantling to see what the issue is, one of the struts has been damaged. - Due date: Flexible