Find a professional gate installation in Donnybrook VIC

Need a wooden date made & installed to act as a garden pet gate in my new home.. Approx measurement Width - 2.5m , Height - 2m. Need this installed by Aug 22nd Thursday. Gate need to extend from wall till fence. Wall is hebel so you cannot mail into thr wall.Please refer image for type of gate and actual sites where gate needs to be installed

I need to get instilled two side gate at my house

timber side gate 1.8meter wide

I would need the "Side gate of the fence to be Stained" in a color "Sikkens Cetol HLSe in Color Walnut (010)" or similar. The stain can be found in Bunnings: Sikkens 1L Cetol HLSe Walnut Timber Finish - https://www.bunnings.com.au/sikkens-1l-cetol-hlse-walnut-timber-finish_p1521192). Things to note: 1) Stain only on - Public facing side/external side of the fence (not required on internal side of the gate) 2) Side gate measurement: 1.8 meters (height) X 1.2 meters (width) 3) Quote includes Stain and accessories (brush etc..,) - Bring your own - Stain and Accessories. 4) Once the job is done, notify by uploading the photo/video

Need to attach a wooden side gate to the outside brick wall of the house. The gate is already available with all the parts, need someone to drill the wall and attach it. Opening width 1m, gate width 90 cm, will need to add a wooden post to fill the gap, we can provide the post if required. Pictures of the gate and wall is attached. Payment is negotiable. Due date: Before Tuesday, 31 October 202

install timber fence 25.5m long, and side gate to span 1.8m wide side gap between fence and house - Due date: Flexible

agregate driveway have some cracks. needs to fix that. also some bluestone paving on pathwat to front door has mis alligned. need to fix that as well - Due date: Flexible

I am looking for someone to supply/install a timber gate at my new property. I am looking for a gate and posts made of standard timber paling 1.95meter high width of gap is 1.4m. Picture 2 is an example of what I am after. Due date: Flexible

I need 2 gates ro be installed. - Due date: Flexible

Installing a gate to block off the side of my house from the garden. Will be between the house bricks and wooden boundary fence. Needs to be really sturdy latches. Size of the opening is 1051mm that’s from brick to the beam on the fence. The gate I was looking at buying is 900mm merbu wooden slat for $136 from Bunnings but I if you would like a quote for a wooden gate built I’m happy to look at that as well as instal. - Due date: Flexible

The Side fence gate hinges need to be repaired and aligned to the lock. - Due date: Needs to be done on Saturday, 25 February 2023

Side gate to be installed in donnybrook - Due date: Flexible

Hi, I am expecting my newly built property to be turned over to me during 8th to 12th August. I am anticipating that the fences can be built right after. The property has 10.5m width and 21m length OR 63m all. I still have to reach out to neighbours in terms of cost sharing and their preference. It will include a driveway gate and pedestrian gate. Could you please quote on the following: White wooden picket fence (front) – 1.2m tall Driveway gate (manual & auto) Pedestrian gate (swing) Timber pailing (side & rear) AND/OR Colourbond fencing (side and rear) I am usually busy during work hours and might miss your call. The best way to reach me is via email. Thank you, Lilac - Due date: Needs to be done on Friday, 19 August 2022

Just need a timber gate installed. Much like the one in the photo closer to the back yard. But same width across as the photo

Gate 1 size is 1.5m long Gate 2 size is 2.5m long - Due date: Flexible

Side gate was taken off by concreters and concrete is ready for letter box needs drilling and installing - Due date: Before Sunday, 12th Dec 2021

I would like to do fencing around my house and install a gate too. Please provide me with your quote (Timber) - Due date: Flexible

Approx 108m2 of exposed concrete needed on a new build. Driveway and footpath surrounding the perimeter of the house. Required 40mm crushed rock F72 steel mesh Expansion foam/ Able Flex Y12 reinforcement bars drilled in where driveway meets garage and where required Saw cuts are required Wash & Gerni I can do the 3 coats of polyurethane sealer More pictures on request Need to see previous work/ references Can work out a deal externally Please quote, happy to accept ASAP Thanks

I'm in need of someone to construct a Hamptons Style Side fence with a gate. Similar to the attached image. White in colour. The length of the whole fence is 3.8m and needs to be total of 1.8m high. Swing gate is needed (1m door if possible). Open for doing double gate too.

Require 20-25 sqm2 of coloured/ aggregate concrete for a driveway and porch.