Find a professional gate installation in Mount Martha

removal of hinges from pool post and gate and install new hinges on glass pool fence

Hello my electric gate battery is low and it requires charging.

We are pulling down our front fence as we sold it on marketplace. It’s getting picked up tomorrow (Friday 8th). Most of it’s uninstalled but needing help to get the last 4 posts out. There’s a fair bit of digging as the posts are set in deep. Will also required hammer drill to remove concrete from the base of posts

Paint 2nd Story tin corrugated roof. Area is approximately 5m x 10m. We will supply the paint. - Due date: Before 24 March 2024

I need a fencing/gate installed at our property. In the blade style black aluminium. The total area is about 13m. - Due date: Flexible

New steel electronic gates, swing open, Colourbond - Due date: Before Sunday, 21 January 2024

Old cement fibro home, requires someone with carpentry skills to replace rotting timbers and replace some supporting beams. There is also a timber gate that needs to be re-framed - as the existing frame is falling apart. Due date: Needs to be completed ASAP.

Remove and dispose of a pair of metal framed jarrah board gates 1.86 wide 2.40 high Would need two people - Due date: Before Thursday, 2 February 2023

Back gate has come off its hinges. Requires new outdoor grade hinges to be fixed on and a new steel base plate to ensure the fixing rods stay in place. - Due date: Before Thursday, 29 December 2022

I need an outside gate re-hung as it has come off it’s hinges. I need an inside wooden sliding door to have new rollers as it does not roll correctly - Due date: Flexible

The sheet of corrugated metal which is part of the garden shed roof has come off and needs to be reattached. - Due date: Flexible

Fence and 2 gates require staining - see attached pictures. Oil supplied, will need tray and applicators and tidy up afterwards.

I need a professional painter to paint the front and back of my front door and my side gate. The front door will be bright yellow and in gloss. And the side gate will be Painted to match the fence around it. You will need to provide the paint for both.

Need a carpenter or fencing expert to take down the side fence and put in a gate with a lock for access

Needing a back gate installed to existing fence. 2500 x 1700. Can be double door gate and pine slats is fine. Pic 1 is the section where the gate will go, Pic 2 is example of the pine slats - Due date: Flexible

The front drive gate hascome off its hinges .the post with the hinges now doesnt line up with the gates hinges the hinges need o be realigned or new post put in - Due date: Flexible

hi there, Essential job - currently can’t use driveway gate snd no light near entry of garage. So Electrician needed for x1 job, x2 small tasks. flexible day/time that suits you. Mornington/Mount Martha area. 1) - we have installed a new auto opener on our driveaway gate already, But actual solar panel, needs to be relocated about 10 metres away to get more sunlight (as current position is too shady and brand new unit wont power up due to lack of light), so will simply need to add some extra wiring along a fence line for about 5-10metres. Alternatively if easier can wire control box into mains, house switchboard is about 10metres away. whichever works and is easier It's a small solar panel/system, which powers the electric opening of driveway gates. It's remote operated. Also one of opener hinges will need to be screwed back onto gate (it's come away) Please see photo of model/unit ATTACHED 2) we have purchased a basic twin spot light with auto sensor built in. it simply needs to be mounted to tin garage wall (and wired into mains line, which is right next to the mounting point on garage. Job can be done ASAP time this week. flexible. $75/hour electrician rate. i have included 3 hours in job Labour only on air tasker job. Additional materials/parts extra on top of 3 hours labour fee on airtasker MODEL DETAILS FOR AUTO GATE OPENER (with solar and mains connectivity) BRAND: E-GUARD (from mytopia/ebay) MODEL #: DSN-148 (solar top model) Double Swing - Electric Model: DSN-148 Voltage: 24V Max Per Leaf Gate: 3.5m Max gate weight: 900kg Waterproof Grade: IP55 Remote Frequency: 433.92mhz Single Swing - Electric Model: DSN-128 Voltage: 24V Max Per Leaf Gate: 3.5m Max gate weight: 450kg Waterproof Grade: IP55 Remote Frequency: 433.92mhz Double Swing - Solar Model: DSS-188 Voltage: 24V Max Per Leaf Gate: 3.5m Max gate weight: 900kg Waterproof Grade: IP55

Fence/Gate post needs replacing. Rotten and broken on base. Looking for supply and installation of new post plus removal and rehanging of gate. Fence post is 120x120mm From base to top is 1840mm (Not including in ground base). Top of fence post is simple pyramid shape. No need to paint, we will repaint after job is complete.

hi there, Electrician or electric handyman needed (not mains connected - just very low voltage solar system we have installed a new auto opener on our driveaway gate. But it jus needs to be wired up and panels need to be mounted on driveway post somewhere . It's a small solar panel/system, which powers the electric opening. It's remote operated. Please see photo of model/unit ATTACHED - I have ALL brand new parts on site Job can be done ASAP time this week. flexible. Should be quick and easy. hard to say. 30-60mins. $75/hour electrician rate. $55/hour handyman rate i have included 1 hour in the job (plus airtasker fees) so you are clear $75/hour or $55/hour. Labour only . Extra time payable if need be. 1 hour minimum payable even if 15-30mins job only kind regards, MODEL DETAILS: BRAND: E-GUARD (from mytopia/ebay) MODEL #: DSN-148 (solar top model) Double Swing - Electric Model: DSN-148 Voltage: 24V Max Per Leaf Gate: 3.5m Max gate weight: 900kg Waterproof Grade: IP55 Remote Frequency: 433.92mhz Single Swing - Electric Model: DSN-128 Voltage: 24V Max Per Leaf Gate: 3.5m Max gate weight: 450kg Waterproof Grade: IP55 Remote Frequency: 433.92mhz Double Swing - Solar Model: DSS-188 Voltage: 24V Max Per Leaf Gate: 3.5m Max gate weight: 900kg Waterproof Grade: IP55

Need to relocate large gates to be free standing. Assume you'll need to cut existing steel post 100mm below ground and back fill, auger new holes for posts stand new square steel post 5/6mm thick 100 x 100mm posts which will be concreted in plum, once completed will re-hang gates which might need to be welded off.