Find a professional gate installation in Preston VIC

Hi, Need someone to repair or potentially replace damaged frame for exterior driveway gate. Existing damaged frame can possibly be bent back into shape and fixed to concrete using bolts. If this is possible. If this is not possible then replacement frame to be built using galvanised steel posts or similar for existing gates. 2x Gates to be re-hung after this is completed. Gates are quite heavy and tall, 1.8m and I am happy to assist in moving them before the other work takes place.

Hi. I have a steel gate frame I want installed (Stratco) as old rotted one blew off hinges. The gate frame will need to be cut to size and then new cladding (cypress pine) attached to the new gate frame. All materials provided for gate frame plus old gate frame. Will require own tools to cut and possibly some consumables. (Ie. screws to attach cladding) Also have front gate hinge that is loose. The gate is an aluminium type and keeps coming loose after tightening.(see last pic)

2 x wooden gates need handles so they open from outside

We have an electric gate to our property. The power box has been damaged and needs replacing. Additionally we need to program some new remotes for the gate and adjust the gate settings.

Install gate lock into existing timber gate

I'd like a small wooden gate made and installed at the front entrance of my home. Measurements are approx 1m wide by 84cm high. Simple design - as per the photo below but shorter obvs. I will paint it myself. It will need to be attached to the brick sides. A simple latch is fine.

transport a steel gate frame from Preston to Glenroy

We have three baby gates to install in various wall materials 2x permagate retractable and one wide swing gate

An old 50’s gate requires sanding, painting white gloss, repair and repositioning (welding?) so it closes again. I have another double gate at the driveway that could be an extension of this job however unsure if I will keep it or remove. Being neat and clean is important. I’m on the hunt for a great handyman. I have lots of small jobs.

I need this extra wide/large 3 panel baby gate installed at the bottom of a staircase. It's an awkward area so requires someone with know-how

Fresh coat of varnish on gate and the exterior of 3 timber doors Varnish supplied but not brushes etc

We have a large, metal clad double gate providing access to rear lane, for car access to carport. The upper hinge on one of the gates has failed, resulting in gate being supported only by lower hinge. Seeking experienced welder, to renew upper hinge, and review other hinges (x3) for integrity and strengthening.

Tenant has said AC is leaking and not particurlarly powerful. Please investigate and fix leaking if this is the case. And change the filter

I have a brand new set of swing gate openers with a control unit and two swing gate motors - https://mtmwarehouse.com.au/productlist/2419 I need the old ones replaced, see the images attached. The existing steel bracket needs to be repositioned as the motors are about the same length. I'm after someone who has done a few of these installations before.

My wooden slat side gate has become loose/rotted and needs a new frame. Hinges and posts seem to be in good condition. Seeking someone to fix the door and reattach. Painting not required.

My Gate hinge broken. need to put new hinge and my second Gate also too tight when close it need adjustment. please see the photos.

Repair the welding on gate hinge has come off or may need replacing and installed!

Simple handy man job. Reattach gate hinge to beam. Nail down top panel, nail bottom panel.

Repair bent gate, would like additional quote if able to powder quote - Due date: Flexible

We have a leak which appears to be coming from a small area of flashing above our front porch. Would like to fix before the rains due Tuesday night. - Due date: Needs to be done on Tuesday, 28 November 2023