Find an experienced local painter in Enoggera

I would like someone who has experience painting brake calipers, I would like a gloss red with a high heat paint.

You will: 1. collect my two antique laundry irons. 2. Sand blast them to raw metal and send me photographs when both are cleaned bare. 3. Spray them with two thin coats of gloss black paint, taking care that the paint does not run. and send me photographs when they are painted. 4. Return them within one week.

External house painting

The treads of my new staircase have been varnished and now the kick boards and side boards require a white topcoat of paint. These boards already have an undercoat of paint, and now need top-coating to finish. There are 18 steps in this staircase. Please see the photos showing the areas in white that require top-coating. The brown varnished steps do not need painting.

Paint back deck (just the floor boards) Size of the deck is approximately 5.8m x 3.7m Deck will need a bit of a clean first Then 2 coats of paint. We already have the paint (see photo) To be done as soon as possible.

Air con unit has been removed in our lounge area. Looking for someone to cover the holes (one big and a number of small holes), paint match paint to our wall, and paint this area so it’s good as new! Will need to bring own tools and all equipment. Paint cost for small pot can be paid separately.

Surface Preparation: Prepare the brick surface by cleaning and priming as necessary to ensure proper paint adhesion. Painting: Apply black paint to the front of the building, ensuring even coverage and high-quality finish. Equipment Operation: Operate a cherry picker to access high areas safely and effectively. Clean-Up: Ensure all equipment and work areas are cleaned up after the job is completed.

Spay painting front of buiding bottom section in black top in white ,black spouting and black front door ,amd side fence in black ,icluding the two large shed doors

Paint these timber walls and deck asap please! I think the walls and floor will need a prep base coat first. I already have the paint for walls and floor, but I don’t have a base coat paint yet. The walls will be a creamy colour to match the house, and the deck will be in the colour monument

I am looking for someone to plaster and paint 2 small holes in the wall. Can provide the paint .

I’m chasing a professional painter or handyman looking for extra $$ over the weekend. Have a large pigeon hole unit that I’d like stripped and sanded so all the paint is removed. I can provide chemical stripper for the job (approx. 3L worth) and have some basic scrapers too. Job can be done at Enoggera with access to power, or happy to drop off to your location within 50kms or so if you work better in your own setup. Dimensions: 190cm L x 75 H x 39 D

Install 1200mm high white picket fence either side of driveway, 3.0m and 2.6m respectively. Between 10-15 June 24.

I have 3 walls that need painting (Walls, windowsills, and wood around windows) Also another 2 windowsills that need sanding and painting And a few other small sections on the house that need to be painted.

Water based paint was spilt a few months ago on my timber floor during renovations, and it needs to be removed. You will provide the equipment for the removal and get rid of the paint for me. After the paint is removed another contractor will sand and polish the floor.

I want to change my tray colour from aluminium silver to a black,

Paint brand new wooden fence - both sides Ideally on the 19th or 20th of April The measurements are: 1.8m high 40m long It will be a brand new unpainted fence.

The skirting boards and door trims in my three bedroom house require the nail holes filled & sanded, and then the patched areas are to be painted. These boards have already been painted, so this is just a patching job. I’ll provide the paint. You’ll provide everything else.

An outdoor wall constructed, continuation of house in preparation for outdoor kitchen

Need a plasterer to set and sand a ceiling ready for painting. Note I tried to do myself however it was a fail so will need to sand back jointing compound and start again (see pictures). No cornices to be done. I have a bag of gyprock base coat 45 jointing compound and a roll of paper tape left over you can use. Area is 11m2.

Wash walls ceilings & fans