Find a professional pergola installation expert in Bentleigh

I want someone experienced in assembling a pergola

We are installing motorised pergola blinds and need a double power point to be installed on a beam or rafter (I'll include a pic). We already have a power point on the deck at the bottom (will also include pic), so probably need to wire in from there up the beam. - Due date: Flexible

Seeking a handyman to build a simple 10m2 freestanding timber pergola down side of house, with a flat Laserlite roof. Timber suitable to paint ourselves once complete. Dimensions are 2.5m wide x 4m long x 3.4m high. It is a utility aea and does not need to win any design awards, just be functional. Structure should be freestanding (not attached to side of house). Photos attached: - current disused space at side of house that we would like to make into a covered utility area. - sample image of the style of pergola we had in mind. - Due date: Flexible

Looking for expert to build free-standing pergola. Dimension approx 3m × 3m Happy with timber or metal pergola frame Adding price for site visit only

I Need a 4m x 3.5m flat pergola in my backyard connected to my home with polycarbonate. Timber frame. Please give quotes Must be experienced

Need to replace a short Woden beam, hoping large beam can be repaired with filling and some paint, please see pictures - Due date: Flexible

The previous owner had installed this pergola with approval so I need to have it removed. It's on the balcony (I'm on the top floor of a 4 storey building). It's 3.2m long x 2.3m wide. The two taller posts are 2.2m high. The taller posts have been concreted in below the pavers so will need to be cut off. The other two posts are fixed into the planterbox, so will need to caulk the holes for the fixings after removal The lift of the building is 2100h x 1590d x 1380w Happy for someone to come have a look first prior to committing Refer photos in comments

Remove old BIR, replace with new including doors and internals and removing bulkhead above in 2( possibly 3) locations. Build small pergola

Need a pergola painted 2 coats. Roof will not be removed. Paint and materials supplied.

Fix a new Pergola on existing deck . - Due date: Flexible Measurements 4680 *5310 mts or approx 15.5 ft 17.55 ft Pics of the backyard are attached .

Building a pergola attached to the side of the house

I need someone to build a cantilevered arbor. Specs: - Either wood or galvanised steel/metal - Number of posts: 4 - Spacing between posts: 1.2m - Color: black/monument - Posts to be concreted in the ground 800mm deep - Height: 3m - Length: 1.5-2m (welcome suggestions for this to be structurely safe so it doesn’t fall over) - Tension wires to run between the arbors for a vine to be planted between posts Place / location: - Between a driveway and a boundary fence - Garden bed depth of 50cm

Install and erect pergola beams four cypress pine posts ( 115 x 115 ) into existing gal stirrups, which are embedded in concrete bases, to ensure straight and level then install two header beams. It can be done over next two weeks approx.

Replace four posts and replace new 2 headers, plus roof joists. Replace two rotten bearers and some floor joists. Help purchase and load the above materials so will need ute or similar vehicle to transport the materials to the location. Also some some experience in this type of work. Minimal tools will be needed as I will most that will be needed. So there will be two us doing the work Work can be done any time between 6.3.21 to 6.4.21 that suits you ie weekends or after hours. It could mean 3-4 hours over 4 days or some combination that suits you.

Hi, looking for someone to building a deck and pergola, approximately 20sqm