Find a professional verandah installer in QLD

I have previously sikkens the front verandah and not re-coated it in time. It now requires a light sand to remove the deteriorated sikkens product. The verandah area is about 19 square meters. I am only after a price to sand the deck.

Am wanting to get a balustrade put up on my front verandah ( single story). Just a top and bottom rail and the x in the middle

I need 6 verandah posts to be replaced, as the bottoms of all of them are rotten. Main issue is it seems the original builder used one post from ground to roof of 2 level house. Happy to replace post wher ti meets at beams. see pictures. Need it done as soon as possible

I need the verandah ceiling painted

A section approx 3.5 m need a replacement bottom rail and replacement posts

Glass enclosure. Need quotation.

I have a rotten verandah post that needs to be removed and replaced. 100 x 100 x approx 2800. Has attached both timber and stainless steel cable railing.

Verandah outdoor blinds childproof

Verandah is approx 8 x 6m. Entire gyprock ceiling has detached from frame. It is currently held up by a prop and the ceiling fan. The gyprock needs to be all pulled down and a new lot put up.

Job for a carpenter (QBCC carpentry license) with experience in building backyard patios/verandas only. Initially only require posts/beams, decking subframe and joists (roof and flooring later potentially c@sh). The entire project is for a backyard verandah and tuffloor balcony attached to a two storey house. Stratco materials, product and engineering plans available (sample pictured). Dates flexible including weekends but the earlier finished the better. Home owner with extensive building experience may be available to help.

Our verandah walls have surface mould (that wipes off) and looking to have it removed/cleaned properly so it doesn't come back. We clean every few months with warm sugar soap water and it wipes off easily, but it eventually comes back

Small glass pane smashed, needs replacing

Fallen tree to be cut up & taken away Repair wooden veranda

The back verandah steps down to the garden only have a banister on one side, leaving the other side exposed. This is dangerous and not to code. I need to have the other banister installed in such a way as to match the rest of the staircase. Building is a queenslander and the staircase is timber.

Need back verandah insulated and covered under metal roof to cover the wire of lights we have had installed

String several solar fairy lights up 3 trees going to verandah Will require ladder and tree climbing skills

I need someone to remove asbestos from a verandah area ceiling (5.6m x 1.8m) and wall sheeting, including proper disposal.

I need an experienced builder or carpenter to help transform a 1.8m x 5.6m raised verandah into an enclosed room and integrate it seamlessly with the rest of my house. The verandah is already at the same floor level as the main house and is structurally strong enough to build upon. This project involves: Demolition: Safely remove an external wall, ensuring structural integrity is maintained. Manage and dispose of all debris (refer to the attached picture). Construction: Build external walls around the verandah, including insulation, plastering, framing, etc. Note: The installation of windows, doors, and breeze blocks is outside the scope of this project.

I have some colourbond roof sheeting that needs to be cut to size and put in place under a Queenslander verandah. I have the materials just need someone to do it.

Airtasker 1. Remove 2x outdoor verandah light fittings. (2.5m height) 2. Replace 1x outdoor verandah light fitting. (3m height) 3. Replace 4x outdoor verandah light bulbs. (LED) 4. Wire up outdoor light fixture with 8x light fittings “Lampada Cantino” (provided) Guide wires already in place. 5. Install outdoor light fixture to structural beam with hardware provided. Supplies required: Electrical cabling as required. 4x light bulbs to suit existing fittings (GU10 LED) Ladder and tools as required.