Find professional window and door services in Byford

Hello there, I need a handyman to re-hang or secure my Daytek wall-mounted clothe line. Please see picture for more details. Please quote on labour and materials including any additional drilling, patching work and cleanup if required.

remove 3 rusted metal door frames from brick walls and fit 3 new metal door frames

We are looking at getting a hidden door built with acoustic wooden wall panels.

Needing to improve soundproofing to home office by replacing existing hollow core door (15kg) with solid core (40kg) and adding some soundproofing to seal airgaps. Have most of the equipment/tools required: DOOR Have a 820mm wide, 40kg, solid core door (Hume 2040 x 820 x 40mm Entrance Door Duracote Vaucluse XV14) that needs to be shaved to fit an 815mm wide metal frame (have Ryobi 18V ONE+HP Brushless 184mm Circular Saw). HINGES Have a range of additional hinges that can be used to install (Lane 100mm Zinc Plated Fixed Pin Durasmooth Butt Hinge - 2 Pack, Pinnacle 100mm Fixed Pin Butt Hinge - 2 Pack and Pinnacle 70mm Fixed Pin Butt Hinge - 2 Pack - wasn't sure which one was best suited) as original door weighs 15kg. PAINT Have white door paint that needs to be added to the door (Paint Partner 2.6 x 3.6m Clear Plastic Drop Sheet, Craftright Folding Saw Horse - 2 Pack, Monarch 75mm Cutting In And Framing Synthetic Paint Brush, UNi-PRO 3L EzyPot Paint Pot, Walpamur Inside 4L White Semi Gloss Interior Paint - 4L, Flexovit 115mm x 1m 240 Grit Painted Surface Sandpaper Roll, UNi-PRO Plastic Hand Held Paint Stirrer). DOOR HARDWARE Would like to reuse existing door hardware, so spindle and barrel holes to be drilled in new door and existing door hardware added. DOOR SEAL Have bottom door seal kit (Raven RP60 Door Bottom Clear 920mm) that needs to be resizes FRAME SEAL Have door frame strip (Raven 5000mm RP59 White Self Adhesive Window and Door Weather Strip) to be installed around sides and top of door frame. GAP SEAL Have acoustic sealant (Selleys 435g Grey Flame Flex Fire And Acoustic Sealant, UNi-PRO Professional No-Drip Heavy Duty Caulking Gun) for any joins/gaps. Things I don’t have: WEDGES To raise door from the ground for when door gets attached to the frame HOLESAW Drill bit for door handle SPADE Drill bit for latch and striker plate CHISEL For latch and striker plate PLANE To shave down door

I need a replacement of the rollers on TWO sliding doors that are currently grinding and not operating smoothly. I don't have any tools or parts, so you'll need to provide everything required for the job. Location: Byford

Need two new doors hung and hardware fitted and one barn style door fitted and hardware

Small home office (~3.75m x 2.74m and a 0.72m hollow door) needs sound deadening due to proximity to kids rooms. Looking to reduce low (subwoofer) and high (voice/sounds) frequency sound. Expecting a solid wooden door (4-panel style, painted white) and sound absorbing panels/bass traps for walls and ceiling to be required. Wooden wall slats with acoustic paneling also preferred. Ideally the panels would be no deeper than 20cm. Open to MLV and green glue solutions too. General plan images attached indicating rough panel size and locations, but open to understanding the effectiveness of this approach. Sound panels showing as white, but ideally covered in black fabric (except for ceiling panel, that would be white and hanging just below the ceiling to allow for led strip lighting). Flooring is hardwood, so deciding on installing carpet or just a big rug. Primary purpose for the room will be working from home, video calls and loud gaming sessions in the evenings. Not looking at full soundproofing (building new insulated walls, etc, mostly due to the small size of the room already) but open to suggestions/recommendations as would like to be able to use the room for audio recording/streaming with minimal outside noise and room echo.

Door will be supplied Will need to be trimmed down Hinges n door handle to be installed Hang new door

I'd like a dog door installed in the bottom of a glass window. It is for a small dog. I also need rollers in glass sliding door fixed or replaced.

I need a quote and installation of a dog door for a small dog and rollers fixed on a sliding glass door.

Fixed side of doors has broken lock, the other side has dropped

I have 2 new wardrobe doors that(may) need slight sanding down and to be hung. 1 needs a door handle attached (not operational handle, just a pull handle).

Fitting new door locks, windows blinds, repair / fit samsung lock, fit pipe to empty jacuzzi, compound sweeping

I need 3 doors fitting internally There are no existing doors there currently but there are hinges on the frames

Replace the flyscreen with new material - Due date: Before Wednesday, 13 December 2023

I am wondering the quote to replace or repair the bathroom door. - Due date: Before Wednesday, 15 November 2023

Need a new door put in my house - Due date: Flexible

Replace rollers on sliding door plus minor repair to door and replace flyscreen on security screen - Due date: Flexible

Install an inside barn door from Bunnings between living area and corridor to bedrooms - Due date: Needs to be done on Friday, 29 September 2023

Quote what the job is worth to you. Sorry to the previous people that quoted the last one, it wigged out and wouldn't let me accept Hi all, I need the steel wire that runs on the pulley of a garage door replaced/repaired today preferably. Both need doing, asking price is for one. The other one can be discussed in person - Due date: Needs to be done on Sunday, 27 August 2023