Find a professional local carpenter in London Camden

Finish wall panel going up the stairs and around the landing ( have included pic of style of paneling I want completed, basically just the boxes left to do)

I ordered some 9mm white MDF in clearance to make a temp partition wall but they only had 18mm. It's very heavy to use and although I've done one three sided box, it still needs shaving down and putting back up. I also need the right hand side to pin one panel on the other with small L two screw brackets. I have a lot of MDF left and just need a mis-match of bits to make it private from one side to another but it's something I will take down in a few months. I could have done it but it's too heavy and precarious and I have a few ideas. I have the material, including plainer, jig-saw, which I haven't been very good with either. Basically I started it but although it's looks easy, it's all too much for me now. For someone stronger who has done this before it will be a doddle. Also I need a handle put on a door I bought for it all. I will cover it all with wall paper or plactic stuff after or you could do that too?

https://www.argos.co.uk/product/2755126 This shed

I have a nice glass door that I want to use to partition my open plan kitchen and living room. The partition wall would be floor to ceiling 270cm width 250cm height x 5cm thick.

Build unit per photo below

Do you think this stain can be removed from the mattress? Could you also get this stain out of this cushion If so could you provide a quote for each and today for both bits of work?

Need 4-5 weeks lead time to order the kitchen, but we need it fitted. Has some fiddly bits like cutting the backs of some cabinets around a steel beam. Would like someone with appropriate insurance please.

I have a covered bench that I need putting together. https://furniture123.co.uk/p/honeysuckle-corner-arbour-fol102802 I have treated it and also levelled the ground but it now needs to be assembled. I’d love to help someone do this with me as it’s a two person job, and ideally they would bring their own drill (with 1mm & 5mm drill bits. However I do have a drill and could buy the bits. Thanks!

Fit decking on balcony (decking supplied)

The doors on my bedroom wardrobe haven't been assembled properly. There are gaps on the hinge side of the doors that shouldn't be there and the doors subsequently overlap/sit over the drawer underneath when they are closed

I need to repair a piece of broken marble. It needs to be glued and polished and try to seem it didnot break. Please explain how long, materials, and price in the quote

Hello! I want to shorten my kitchen top to fit a larger fridge plus fixing x2 legs for supporting the free side. The top presently measures L 120 cm X D 60 cm and it needs be 70 x 60.

I need to fix casino tables, cut some wood for I tire and fix some chairs.

painting a newly installed mdf wardrobe - Due date: Flexible

We would like to build shelves in our cupboard. It contains both the gas and water metres, thus, it has pipes. Because of the shape of the cupboard, we would like L shaped shelves. We need help deciding on the material as well as the quantity and the measurements. We will then buy the material. - Due date: Flexible

I need to take off one mitchen wardrobe to make space for dishwasher - Due date: Before Friday, 20 October 2023

Cut and fit carpet round newly fitted wardrobes. Includes putting in new gripper around the wardrobe (~1.5x x 0.5m) and retacking carpet down in the whole room (~3x3m). - Due date: ASAP

Hi, I have a small kitchen that will need worktop cut to size and fitting. I have ordered 2 pieces of solid wood worktops of dimensions 3M* 635mm* 40mm(pre oiled) and 4M*635mm* 40mm(pre oiled) Link: https://www.worktop-express.co.uk/wood-worktops/prime-oak-worktops They need to be cut to size ON SITE and joined/fit together to APPROXIMATELY following 3 sides(I don't have exact measurements so you need to do some measuring on site) sink side: 2100mm * 635mm; hob side: 3200mm * 635mm ; fridge side: 850* 635mm this will include also 2 cutouts for sink and hob and maybe some oiling and edge profiling - Due date: Needs to be done on Saturday, 12 August 2023

I have 2 alcoves and I would like a cupboard and 3 shelves in each one Just made from mdf don’t need it painted - Due date: Before Sunday, 21 May 2023

The desk has a glass top and a wooden front panel and draw which needs restoring. Wood is a black, ebony stain I think, and is slightly chipped and worn on the edges. The inside of the draw also needs some cosmetic attention where it is also worn. I think it's a satin black finish on the inside with foam inserts. The draw works well mechanically. The desk width is 150cm. Depth is 60cm and hight is 73cm. The draw is 70 cm W and 6cm H and this is the part that needs the most attention . - Due date: Flexible