Find a professional local carpenter in London Covent Garden

Hello, we would like a MDF cover for a radiator, super simple, box like, that we can then paint to match the wall. Radiator is 78cm wide.

Carpenter to build a partitional wall 2650 mm x 1750 mm and fit a door in (picture with yellow square) Also, to build recessed 500 mm depth shelves (4) inside a wall/recessed shelves (as picture attached for reference and picture attached where that should be built) Build a wooden ramp Change 2 locks on doors

Hi, we have a few projects of similar scope, need few false walls installed, doors and shelves. Experienced carpenter needed in Central London. Best if you gave us a visit for a quote at Shaftesbury Ave 199, windows covered with Animetal posters. A quick breakdown of the job: 170 cm gap over 3m height for false wall/door installation at the same time we need to create a lock on the doors that previously didnt have one and also we need to create a false wall with depth and shelving and install led lights what we need is depth in the wall/regressed shelving. Please find images for reference. when replying/quoting, please indicate what date and time can you come for a visit to inspect the site

Hi, we have a few projects of similar scope, needs few false walls installed, doors and shelves. Experienced carpenter needed in Central London. Best if you gave us a visit for a quote

- Need someone for 2-3 hours to attach a Foamex board to a ply wood board at an exhibition. - Will require their own equipment (nails, hammer) to attached board - Please see dimensions of stand below and Foamex board to be attached - Time and Date: Tuesday 16th July 11:45-14:30 - Address: Great Queen Street, London, WC2B 5AZ (corner of Wild Street)

Make and install 26 custom-sized wooden shelves (3 different sizes) Group 1: 6 shelves (bathroom closet) - 67cm x 30cm x 2cm - Brown wood Group 2: 10 shelves (bedroom closet) - 40cm x 39cm x 2cm - Brown wood Group 3: 10 shelves (floating bookshelves) - 37cm x 23cm x 2cm - White wood Measurements are provided above. Please make the shelves before arrival, then come to install them.

Hi, we are looking for carpenter to build two pyramid/tier display stands - 90 cm in length from each side - First shelf starting at 20 cm cm from the floor - Another step: 20cm in height from the first shelf and 20 cm shorter in length - Same goes for all 4 levels/shelves. 20 cm gap in between shelves and 20 cm shorter than the previous shelf. - Bottom floor should have flat not sharp corners - All in black To sum up: 20cm height between shelves x 4 shelves. The last level shelf should be put at around 90-95 cm height from the ground, as we dont want it taller than that. With two openings/sliding doors/hinges, etc at the back and front at the first 3 levels (bottom up). I have added a rough sketch, please feel free to ask any questions.

Hi, we are looking for carpenter to build two pyramid/tier display stands - 90 cm in length from each side - First shelf starting at 20 cm cm from the floor - Another step: 20cm in height from the first shelf and 20 cm shorter in length - Same goes for all 4 levels/shelves. 20 cm gap in between shelves and 20 cm shorter than the previous shelf. - Bottom floor should have flat not sharp corners - All in black To sum up: 20cm height between shelves x 4 shelves. The last level.shelf should be put at around 90-95 cm height from the ground, as we dont want it taller than that. Also, if possible the very bottom together with the space in between the shelves would ideally be turned into drawers for storage. I have added a rough sketch, please feel free to ask any questions.

Hi there, We are looking for a carpenter to separate 4x large cabinets from the floor and each other. They are separate units that have been joined together. So it shouldn't be a huge job. - Due date: Before Monday, 2 October 2023

I need to resize a wood/chipboard (IKEA) bedhead to fit a pre-existing fitting in the room. It is a single rectangular piece of wood/chipboard, and you may need to measure the existing fitting in case it is not perfectly square. It may also be sensible to cut a separate piece of wood to support the cross-beam. I can provide measurements and photographs but you will need to provide tools for cutting the chipboard without destroying the bedhead. - Due date: Needs to be done on Tuesday, 8 August 2023

I need someone to build a wood and glass display like the attached picture. Dimensions are as follow: D: 65cm L: 100cm H: 60cm - Due date: Flexible

1. Separate a room into 2 rooms. You will build one partion wall longways then another walls widthways (a T shape) with 2 doors (we have wooden planks that can be used for this) 2. A small reception desk (we have the wood for this) - Due date: Before Friday, 15 July 2022

I have bought some scaffold boards to use for shelving . I need them sanding off a little just to take the splinters off then cutting to size and putting up. - Due date: Flexible

Need a cabinet built along a 3m long wall. Have all of the materials needed. Wood needs t be cut on site. - Due date: Before Saturday, 5th Feb 2022

To create a bar flap and a hinged door underneath for our upstairs bar. - Due date: Flexible

Hello. I need someone to put together a small flat packed Magnet kitchen. 3 base units including dishwasher, fridge and sink and 3 cupboards above and a work top.