Find a professional local carpenter in London Kingston Upon Thames

There is a small area in our kitchen (56cm x 60cm) where our old fridge freezer used to stand. We've had to clear that area of asbestos tiles and now it's too uneven to install the new fridge freezer. It needs levelling (one way or another). We assume self-levelling concrete works best but are open to suggestions.

I need a wood veneer kitchen fitted and the old worksurface removed and disposed of. Cut out required for gas hob and needs to be fitted around butler style double sink. Island surface also needs to be fitted

I have a home with several pieces of wood that need to be custom machined and then spliced by me

1) Dismantle for reuse the left hand built in wardrobe (1st photo) in order to install plasterboard behind 2) dismantle box  and redundant pipes inside on left hand side of this built in wardrobe (client can dispose of rubbish) 3) Install on dot and dab basis insulated plasterboard (client to supply) behind where left hand built in wardrobe(1st foto) and at the back of right hand cupboard(2nd foto - no dismantling required other than ubhooking and rehooking quick release doors ) were 4) Cut a piece of offcut insulated plasterboard and screw with offcut plywood client would provide to ceiling where the box was removed.   5) Reduce the size of 2 skiting boards so they do not get in the way when the left hand wardrobe is re-installed against the plasterboard   6) Apply lining paper (client to supply) to the insulated plasterboard   7) Re-install left hand built in wardrobe against the insulated plasterboard, client will supply cut plywood pieces for the left hand shelve, as the original shelves will not be deep enough once the box is removed.   Client will empty the wardrobe before work starts.  Parking is available on driveway. Worker to supply fixings/screws in case not reusable and tools/mixer for the job. client to supply insulated plasterboard, plasterboard adhesives, lining paper and adhesives

My wife and I are looking to replace our garden shed which came with the purchase of our house. The shed is made of wood, around 7 feet deep with one plexiglass window. Looking for someone to dismantle the shed as well as dispose of the material (including the wood scraps at the side we inherited with the house). Friendly and flexible clients :).

Had new carpet fitted upstairs but the fitters didn't trim the doors down to accommodate the doors

A number of things need to be done in the studio. A kitchen fit, wall plastered where cupboards are removed, new kitchen units installed, Lino installed and laminate. Also considering installing a wall in the room. Measurements to the room are pretty accurate. If you could go off this please. If you can do any element of these jobs please share a quote. Size and floor sizes are as in the 2d plan below. 350 per area is offered. Materials supplied. All costs included. Work to be completed by April 5 https://www.kitchenplanner.net/start/?planningId=44039e82-90aa-414f-aed1-a449522b2702#step=1

Banister does not extend to the bottom step of the stairs as well as the top step of the stairs. Hence ready made gates cannot be fitted.

Need shelving n carpentry work - Due date: Before Thursday, 30 November 2023

Repair or removal of old shed. Quote on for new shed, any base preparation and installation. - Due date: Flexible

New roof for small garden shed and new window replace plastic glass type - Due date: Flexible

Remove part of kitchen cupboards and fit underneath fridge freezer to act as a pedestal. Replace integrated fridge freezer and attach cupboard doors. - Due date: Flexible

We have a 4x8 feet shed that needs to be assembled. - Due date: Before Friday, 20 January 2023

6meter long garden shed need to replace a new roof cover. I need quote with materials and without materials .I prefer get 3 or 4 quotes. I will find the best one - Due date: Before Monday, 29 August 2022

Task is to demolish and dispose off an old garden shed. Mostly made of plywood sheets nailed onto wooden beams, and grp coating on roof. Pictures show it clearly. Dimensions: 7 feet wide x 10 feet long + 4 feet open, about 7 feet high. I dont need to recover any materials, so, you can demolish with an electric saw and tak it away if you wish. Of course, you will need a van and some means to dispose off the material. - Due date: Before Tuesday, 24 May 2022

Carpentry job - fix drawers coming off runners

Carpentry jobs including building a wardrobe

Hi, I want to add some units to my kitchen space and also remodel and re purpose a small under stair space to add better use of space and storage. - Due date: Flexible

https://www.lawsons.co.uk/product/1828x600mm-concave-diamond-lattice-trellis/f10090390 Needs shortening by 30cm - Due date: Needs to be done on Saturday, 13th Nov 2021

** MAKEOVER OF KITCHEN CUPBOARD FOR A NEW FRIDGE ** (The integrated fridge and freezer in the attached pictures would have been already removed before the following tasks start) Two main tasks: (1) Remove the existing separating panel; (2) I haven't bought the new standalone fridge yet, but I got the measurement of it. What I want is to leave a empty space (like a cave) for the new standalone fridge; and then for any spare space left (should have some aside and at the top of the fridge), I want to have some narrow cabinets with doors so that I can make good use of space for storage and also for good looking. Questions: (a) Would it be possible? (b) I would like to have the job done as soon as possible. Is that okay for you? Any brief idea when the job can be finished? As I definitely need to have a fridge operating when I move in this house in mid/late November. (c) Lastly, would you please provide information about your price? £/hour & approximately how many hours are needed? Thank you!!