Find a local electronics repairer in Fremantle

We need roughly 150 sqm (floorplan available) of 12 mm engineered floor to be layed (glued). This includes steps. We also require splay beading. The build should be ready by the end of September but it might be pushed a week or two which we would know roughly 3 weeks before.

One or two Wall taps are very tightly screwed on

Two small dents to be pulled out and some black touch up paint where my attempt at pulling with hot glue failed!

I'd like to change out my kitchen taps and faucet. I have found a set that I like, from Tradelink and will need to know if it fits etc before purchasing, and then to carry out the work. - Due date: Flexible

12 stumps dug up and disposed. They are from an old hedge so not deep roots. - Due date: Before Sunday, 14 January 2024

Changing washers in bathroom taps - Due date: Flexible

Hello, i need strong guy to help us lift UPS battery to the server rack 2 UPS battery one weigh 65kg and one weigh 95 kg. we will install the rail on th rack, we then get you to lift it to the rack. the position is not high inside teh rack. its at the bottom of the rack. the UPS will need to go to the rail that we install the work must be done on Saturday 3rd June at approx 3-4 PM. we will probably need you for 1 Hour max and happy to pay you more if its goes more than 1 hour the UPS currently is not far from the rack. we also have flat bed trolley. let me know if you have any question - Due date: Before Saturday, 3 June 2023

Change washers in shower taps to stop dripping. Remove remnants of shadecloth from structure. About 14 "staples" and 4 bolts. - Due date: Needs to be done on Thursday, 4 August 2022

Shower head leking other taps leaking - Due date: Flexible

I have a set of Cerwin Vega XD3s which have an issue. They have an auto standby which turns them on when audio is sent through them. Since recently, this feature has failed and they won't turn on. After researching, it looks like I've found the issue which is a faulty MOSFET. https://www.youtube.com/watch?v=_i8Wb1lRnWE If I buy one I would appreciate someone who can solder it in to replace it. Alternatively, either just jump the MOSFET and bypass it as I don't need them to turn off and on and can remain on. If not, see if any other issues with the speakers.

I have a dynamco para 275 cyclops immobiliser fitted to a 1988 Land Rover 110 diesel. Its not disarming or allowing me to start the car.

Afternoon, we have 2 leaky taps (broken seals) and 1 tap likely needing replaced please, cheers

Red light on, won’t heat up & has a beeping alarm