Find reliable mirror cutting services in VIC

Need a custom mirror cut to suit this space, will need to site measure as it may not be square

Need a mirror cut to a shape of a surfboard about 1600/1700mm long and about 500-600 mm in width

I am looking a glazier to trim mirror sliding door for my wardrobe. The problem I have that the mirror door is way too wide which makes it very difficult to access the middle part of the wardrobe. The entire width of wardrobe is 1800 mm. The mirror door is 1150 mm, the second door is 900 mm. I would like to trim it to make it a bit narrower, say about 950 mm. If you have a professional opinion how wide the door should be please let me know. See photo attached.

Have a Mirror 900 wide needs to be cut 600 and stuck to the wall 15 20 minutes work

I have an extra tall mirror from a sliding door cupboard and it is too big for my apartment. Looking for someone that would be able to cut like 5 inches off the bottom!!

Cut bathroom mirror from bottom by 1cm so I can install a new vanity.

I have three mirrors (6mm polished edges) measuring 2435mm wide by 1820mm high. I need each mirror cut down to 1500mm high. So three cuts in total.

I have three 6mm (polished edge) mirrors sizes 2435mm wide and 1820mm high. I would like to have each mirror cut down to 1500mm high to remove some damage. So three cuts in total.

I have a frame thst I would like a mirror fitted into. Simensions of mirror are approx 72.75cm x 61cm - Due date: Flexible

Cut 2 x 5mm mirrors. Currently 1200x1800mm. We would like to turn them into 740x1800 and 640x1800mm. Both mirrors have commercial vinyl backing. - Due date: Needs to be done on Friday, 6 October 2023

I am looking for a glazier to remove, cut and then reinstall approximately six 1200x1800mm mirrors. Qualified trades only. - Due date: Needs to be done on Friday, 6 October 2023

I have a mirror 1500 h x 900 w that I need cut down to 1500 h x 750 w - Due date: Flexible

cut mirror from a bathrooms. Wall was cut with mirror attached. size 1,7 x 1,4 aproxx - Due date: Flexible

i have square mirror beveled edge, i need to cut in half ( from corner to corner ) to make 2 triangles 🔺️ - Due date: Flexible

Custom hexagon mirror where 1 edge is 270mm - Due date: Before Saturday, 22 October 2022

Need a mirror cut and measured to a fixed wall Roughly 220cm in height and 85cm across - Due date: Flexible

Need 2 mirrors made for these cake stands as they cracked. They need to have a hole in the middle too so they can be re attached. Can drop off to location to get done.

Small mirror in the bathroom vanity has rusted and needs to be replaced - Due date: Before Thursday, 16 June 2022

I bought a mirror frame for living area but it got broken. I need to cut to size so that I can reuse it. - Due date: Flexible

I need someone to help me cut mirror to be used for personal gym. There are 2 mirrors to be cut.