Find an experienced local painter in Dandenong South

hi i am paintinh our showroom flloor already grinded anf cleam assist paint 4 hrs8-12 dandenong

We have a number of white/black fiberglass planter troughs that need re-painting due to blemishes caused by improperly cured paint (the foam packing ended up imprinting on the paint). The severity varies from unit to unit, however to achieve a consistent finish, the whole of the units will have to be sanded/re-painted. Apparently a two-pack paint will be required (only black and white). Some troughs are 90cm long, some are 120cm. Surface area to paint: 90cm troughs -- approx. 90 x 30 x 60cm 120cm troughs -- approx. 120 x 30 x 60cm Errant paint spray into the top/inside of the planter is fine, it does not need to be masked. Our stock/factory is situated in Dandenong South. We have compressed air and would be willing to accommodate repairs at our own site, as long as you are able to work in open air on a day with suitable weather. If you have your own spray booth you would like to use instead, we would be willing to organize drop-off/pick up of loads to your site (we could take around 20 units around at a time with our ute, or if you have lots of space then we'd be happy to organize a larger truck, which would be over 100 units). We will factor distance of work-site in when we look at which quote to accept, with work on our site preferred. We will also look at feedback, and would need to approve the initial sample before initiating more. I've attached an image of one of the 120cm long units for reference. RE. QUOTING: PLEASE QUOTE ON ***ONE 120CM UNIT***, with the following assumptions in mind: - PAINT WILL BE SUPPLIED! - 90cm units will be quoted pro-rata against 120cm price, which I have calculated as having 80% of the area of a 120cm unit. Therefore you accept that the 90cm price will be 80% of the price you quote for the initial sample 120cm unit. - There will be 100+ units to complete, subject to approval of the single sample, so PLEASE QUOTE ASSUMING ECONOMY OF SCALE FOR A LARGER ORDER. - BLACK WILL REPAINT TO BLACK, WHITE TO WHITE

I have made a mistake tying to touch up on stone chip and I sanded it to deep with 2000 grit wet and dry and now the paint is slightly turned white I need someone who can restore it and or sand it down to repair that area it’s a small job. I am flexible I can bring the car to your location/shop to get it fixed Make - Mazda Mode - cx5 Paint code - 46V soul red crystal

Looking for good painter to paint inside a factory . Just cleaning and make look good . All materials including paint and rollers supplied . $30hr

help prepare wheels for painting, training provided. Quote is per hour

One office room , two toilet , one kitchen , four doors need fresh paint.

Looking for a painter to paint factory exterior . Two coats paint . Must operate boom lift . Paint supplied and boom lift supplied .

We are needing a small plaster repair job completed at our workplace, 2 wall plugs to be removed + patch and possible touch up paint. 4 small holes to be repaired in total. We do have some paint but would be happy with just the patch repair done. We are a business located in Dandenong South.

I need a small office patch an paint. White please -you supply paint. See photos. Need done by next friday please, also clean front door might need coat of paint too.

Agitator Steps. Poorly painted from the company. I want them to be properly painted as per standard paint. Paint colour - Yellow.

I have a 2008 silver Honda Civic with some small areas where the paint has peeled off. I attempted to touch up the paint myself, but unfortunately, there is noticeable color difference. I need someone with experience in car painting to help me properly sand and repaint these areas to match the original color of the car. The task involves: 1. Sanding the affected areas to smooth out any rough edges and prepare them for repainting. 2. Applying primer if the primer is missing. 3. Matching the paint colour accurately and applying it evenly to blend with the surrounding areas. 4. Applying a clear coat for a glossy finish and polish. I have a few colour paint, clear coat and sanding paper. If the tasker have their own tools and equipment for sanding and painting, it will be great. Previous experience with car painting and a good eye for color matching are highly preferred. - Due date: Before Wednesday, 13 March 2024

We have two walls that need to be repaired and painted today - Due date: Needs to be done on Tuesday, 19 December 2023

3 large factory roller doors need slats replaced and repairs , possible complete roller as well, - Due date: Flexible

We are exiting our office. The walls need a coat of paint and some touch ups. - Due date: Before Friday, 13 October 2023

resealing the windows some painting patch up hole in the wall which will also include match painting - Due date: Flexible

Looking for a painter to complete one coat on our office Paint provided All holes will be patched ready for painting - Due date: Needs to be done on Monday, 11 September 2023

Need to re-painted whole office wall. Room size 4m X 6m Wall only (no need ceiling) Must be done during working hours 7am-4pm. - Due date: Before Saturday, August 19, 2023

Showroom ceiling approx 18m x 18m needs to be spray painted. I can supply paint. Will also require half the room concrete floor painted in epoxy paint - Due date: Flexible

Hi painters , just need your help with selection of the right shade of wall colour as I couldn’t figure out which which particular shade it is !! You have to identify three shades for me. Wall , ceiling and doors,It’s a 10 minutes job for an experience person. - Due date: Needs to be done on Thursday, 29 June 2023

Painting the exterior building, Will need insurance and happy to use a cherry picker - Due date: Flexible