Find an experienced plumber in Mermaid Waters

Ні, Please quote: Add elbow and down-pipe to existing elbow. This is to be joined at the blue tape as per picture which should just slide over with another elbow. Then carry the down-pipe into my stormwater. Fixed to rendered wall. Shouldn't be longer than 1 to 2 hours work if skilled. Tasker to source material from Bunnings etc and I will then reimburse for this. 2 x square clips Zinc downpipe shoe Zinc down-pipe Down-pipe adapter Any other materials needed to complete So please quote on time only as materials will be at my cost. Thank you.

Devanti benchtop dishwasher is in place with hoses. BDW-8-02G-BK. Need an outlet placed under sink, inlet is there.

Devant benchtop dishwasher BDW-8-02G-BK Needs an outlet tap installed, inlet there. All hoses etc are in place.

I need an under sink water filter connected to the tap in my kitchen.

Shower head still leak water when the 2 faucets has been tightened.

I NEED TO RELOCATE AN OUTDOOR SHOWER AND TAP APPROXIMATELY ONE METRE. YOU MUST HAVE EXPERIENCE AND THE CORRECT TOOLS ETC. SORRY I CAN NOT SUPPLY PICTURES AS MY LAP TOP HAS A BAD BATTERY AND I CAN NOT MOVE IT. THE AREA AROUND THE TAP HAS BEEN PARTIALLY DUG OUT ALREADY.

relocation of outdoor tap and shower

Need a plumber to replace our shower taps with these shower mixer taps

I have a vanity that needs to be installed (either mounted on wall or can buy legs if required). I believe plumbing is ready to go. Also have a kitchen tap leaking that needs fixing.

Need a washer installed for leaking tap

Bought a basic Bunnings toilet looking to install in a house in mermaid waters. https://www.bunnings.com.au/estilo-wels-4-star-4-5l-full-close-coupled-rimless-s-trap-toilet-suite_p0066063?store=8204&gad_source=1&gbraid=0AAAAADtbEB9_B9UdOe22q7OLN-5hmxMFd&gclid=Cj0KCQjwwae1BhC_ARIsAK4Jfrx6lUyEZ-qq-SdrJ8cVOXmn2RrTX_1OECaWFlV7AG60g0O2vp9t5s8aAvO8EALw_wcB&gclsrc=aw.ds

My pool is leaking. Pool guy fixed the valve and it is still leaking so a diagnosis and fix is needed. Photo is as-is today, no top up in a while.

Hot water is not coming to two bathrooms, and a new toilet seat is not fixed properly; it's wobbly. In the laundry room, the hot and cold water tap connection for the washing machine is also problematic.

To remove old mixer tap system and install new one

Hi, Please quote: Add elbow and down-pipe to existing elbow. This is to be joined at the blue tape as per picture which should just slide over with another elbow. Then carry the down-pipe into my stormwater. Fixed to rendered wall. Shouldn’t be longer than 1 to 2 hours work if skilled. Tasker to source material from Bunnings etc and I will then reimburse for this. 2 x square clips Zinc downpipe shoe Zinc down-pipe Down-pipe adapter Any other materials needed to complete So please quote on time only as materials will be at my cost. Thank you. - Due date: Flexible

Pick up 2 toilets from bunnings (click and collect)and install them in the house. The old toilet must be removed for waste. See attached photos

A copper pipe from outside to the bathroom is leaving, need to be replaced or repaired. Please advise if any plumber is available. Thanks

Current toilet seat is broken, although it is very difficult to remove the bolts that are on the toilet to then replace with new seat.

Remove the concrete base and screws of previous toilet. Install new toilet (already purchased) - Estilo White PVC S Trap Cistern Link Suite (link below) https://www.bunnings.com.au/estilo-white-pvc-s-trap-cistern-link-suite_p4821910?store=8172&gad_source=1&gbraid=0AAAAADtbEB8LIMFVpBP7y4LvNpZUYfVSx&gclid=EAIaIQobChMI0NrSueSlhQMVslkPAh3tLANhEAQYASABEgJxEfD_BwE&gclsrc=aw.ds

One of the Toilet is blocked. Need someone to jet blast and/or put a camera to see what’s blocking the pipes. Today or asap.