Find experienced local tradies in Earlwood

Acrylic Render exterior wall around 200sqm. 1 full level, 2 half levels.

I would like a small built in wardrobe with mirrors in the bedroom

Handyman Services Required 1. Draught Sealing: • Identify and seal all potential sources of draughts in the room, including windows, doors, and any other openings. Use appropriate materials like weatherstripping, draught excluders 2. Gyprock Installation: • Prepare the room for painting by installing new gyprock sheets on the walls and ceiling (if required). This includes measuring, cutting, and securely fixing the gyprock to the existing framework using adhesive and screws. Edges should be finished with PVC or metal corner beads, and joints should be taped and plastered with multiple coats for a smooth finish, ready for painting. 3. Window Frame Repair: • Inspect the existing window frame for any signs of damage or wear. Replace or repair any damaged timber or components, ensuring that the window operates smoothly and is properly sealed against draughts and moisture. 4. Skirting Installation: • Supply and install skirting boards around the perimeter of the room. This includes cutting the skirting to size, fitting it securely against the walls, and finishing with caulk or filler to close any gaps. The skirting should be prepped and ready for painting. 5. Water Damage Inspection: • Conduct a thorough inspection of the room for any signs of water damage, particularly around windows, doors, and corners. If water damage is found, identify the source and provide a recommendation for repair, which may include fixing leaks, replacing damaged materials, and treating the affected area to prevent mould or further deterioration.

Build a built in wardrobe, supply and install. Sliding door.

Render to be done on 9 PowerPoints

Small render job inside home in the hall way about a meter long, as seen in the photo. Need it done asap

Hi there! I have an outdoor roll down awning that is held up by a rope mechanism. I can’t fix it by myself as I can’t quite reach it. I have a ladder on the premises you just need to supply the rope to fix :) may need general tools to lock the mechanism. Experience with awnings preferred. Pictures is broken and functioning awning. - Due date: Flexible

Internal rendering to brickwork inside house - Due date: Needs to be done on Monday, 18 September 2023

Handyman to Install retractable side awning on balcony. Posts will need to be drilled into concrete balcony & brick wall. Pictures below. https://www.youtube.com/watch?v=iHDovbEfHq0 - Due date: Flexible

Rendering brick house, external - Due date: Flexible

Awning outside bedroom window needs removing. It’s on the second floor and is very high up - Due date: Flexible

14 different sized picture frames to be mounted on a single (not double) brick wall. Require drill and nails etc - Due date: Before Saturday, 15 April 2023

Assmble a built in wardrobe. It has been removed from a previous house and needs to be installed in another room - Due date: Flexible - Due date: Before Monday, 17 April 2023

Hi, we need handyman to: 1. secure a laundry tub to the wall 2. fill a small gap with render 3. Install a small tile to close a gap 4. Install a metal angle near laundry tub to close gap 5. Silicone around new bench top and vanity - Due date: Before Thursday, 30 March 2023

I need to have strip of concrete under patio/on top of garage repaired and rendered smooth ready for painting. Will also include cutting back thin edge of tiles on floor of patio to bring in line with exterior of garage wall. Also removal of a few tiles still left. Please see photos. - Due date: Flexible

Hi. I need some holes patched up in a brick wall. sanded and painted. Any day before October 30 pls.

Removal of two timber framed glass windows 3m x 1.30m and 1.5 x 1.4m front door security door and door metal awning and trimming. Removing to return balcony back to its original state. Only labor I will get rid of windows etc. - Due date: Flexible

I would Like some help installing a polycarbonate awning over my front door (1.56m wide and 1m projection ). Will also need a hole (85mm x 67mm) cut out to accomodate my aircon piping above the door - Due date: Before Saturday, 17 September 2022

I require lesser block walls to be rendered for a bathroom and laundry area of my home. - Due date: Flexible

The awning to my camper van came off in heavy wind. All the parts are there (except maybe some small screws and some heavy duty glue). Steps in the process: 1. Get the correct glue to reattach one of the metal parts to the camper van (see pic) 2. Bend the bent metal back into place. 3. Screw on and glue the respective parts back correctly. 4. Attach the awning. The awning needs to be able to close properly (or at least very close to being closed). I will leave the lever / stick that closes the awning so that you can check it closes. Budget does not include costs. You will get $250 plus costs. - Due date: Before Saturday, 30 April 2022