Find a professional local carpenter in Central London

Built in wardrobe from floor to ceiling , I want to move the wardrobe to another part of the room.

I have joint in cabinetry, but would like to install grommets for wires: https://www.amazon.co.uk/Grommet-Grommets-Tidies-Desktop-Organizer/dp/B0DRFMY3WX/ref=asc_df_B0DRFMY3WX?mcid=f680b28c6e0439289c5e877e64941239&tag=googshopuk-21&linkCode=df0&hvadid=725810329396&hvpos=&hvnetw=g&hvrand=6948099056472555000&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9045998&hvtargid=pla-2393514816627&psc=1&gad_source=1

Howdens kitchen being fitted so looking for joinery supply for a single vent cabinet. Fitters lined up so Supply only. IMPORTANT - must match elmbridge porcelain shaker cabinets in colour and look. 3 panels needed - 1m by 50cm 2 x 50cm by 30cm

Joinery as part of renovation project: - 2 sets of bedroom cupboards (shaker style) - Utility - Simple open shelving to house washing machine/dryer - Understairs nook - seating, pegs

Cupboards built to cover boiler and water tank etc in our utility room. Would also like 1 cupboard to be sturdy enough for both a washing machine and tumble dryer.

Renovation assistance; No tools required 9am-5pm 1 general handyman required to assist with the following - Paint strip and sand joinery (cupboard doors, skirting, Cills) - Filling & making good walls in readiness to paint - Preparing floor for new carpet including removing staples & screws

Looking for a builder/carpenter/joiner to fit a full length tambour door on the balcony, attached photos of what the door would look like. There is a second task of fitting a toilet roll holder.

We repurposed a shelf to decorative cupboard. We are left to cover the back and sides. For the back, we are using leftover floor boards and for the sides, hardboard. What's needed from you: 1. The floor boards cut to size and installed at the back 2. The hardboard on the sides we need to cut and install. 3. The hardboard needs to be decorated with cane panel and mouldings on the border 4. Wall Mount the re purposed shelf. We will provide the materials but need you to bring tools to cut and install- saw, drill, glue etc. We can provide with necessary nails and screws.

Hi. I would like some cupboard doors made to cover some shelves in a sitting room, similar to the ones shown in the photo. They are flush with the wall and set in the opening and very high at about 2.5m and a similar width. MDF is fine and with push catches. I am then interested in putting beading around the joins to hide them and make it look like panelling. If I can find the right person, I have other bigger projects that need doing. Have included a nominal price, not including materials, a quote might be best. Thanks for reading.

Looking for an affordable way to divide room, I have attached pictures of the look I’d like to achieve. - Due date: Flexible

Recently I had to take off my bath's side panel to fix a leak under it. Because the panel had become warped from damp, it had to have the bottom 1 inch sawed off. I am looking for someone to help (1) fix the panel by adding the extra 1 inch to the bottom (2) repaint the panel (3) refit the panel. Images are attached of the bath before and now - Due date: Flexible

5 days work fixing decking, fixing some joiney f Doors and a shelf - some filing sanding painting - Due date: Needs to be done on Tuesday, 6 June 2023

General builder/handyman required with focus on joinery, to assist in finishing a flat refurbishment. Refurbishment is largely finished, but assistance is needed to complete. Work required includes: - general joinery inc: installing doors & frames, external gate & shiplap panels - Lean to polycarbonate roof installation. - kitchen worktop & side panels - double lining existing plasterboard ceiling - installing engineered wood floor - Decor & making good preferred but not essential. Difficult to quote so happy to take on day rate for experienced tradesmen. Assuming 1 to 2 guys for approx 2 weeks. All materials supplied - labour only. - Due date: Flexible

We have a large, heavy ceramic sink that needs fitting into the kitchen bench, where previously there was a lighter, metal sink. As I understand it, the hole is a bit small so needs widening a bit to fit it in, but also because of it's weight, the current structure may not support it so needs adjusting in some way to accommodate it. See attached images. It is just the fitting it in to the space we need, not also plumbing it in, which will be arranged separately. - Due date: Before Sunday, 9 April 2023

I need a joiner to install 3 doors - Due date: Flexible

Fitting a balustrade - posts/baserail/rail/glass Precise cuts needed to posts. - Due date: Before Friday, 4 November 2022

Require experienced joinery carpenter for the following custom pieces to optimise storage space in my small flat. I already have technical drawings and measurements for each piece. I attach some example reference images (not final) to give you an idea. A previously engaged joinery maker did not deliver, which has left me in a very unfortunate situation without anywhere to unpack my belongings in order to feel fully settled and comfortable in my new home. While I need storage as soon as possible, these are the pieces required in order of timing priority for delivery: 1 x small bathroom vanity in wood veneer 1 x bedroom wardrobe 1 x living room cupboard 1 x media unit / wall shelving 1 x desk with drawers (option to make this freestanding) The flat is in a mews with parking out front to make it easy to load and unload materials. If you are interested, please: - have photos available of example work you have done that is similar - be able to provide pricing estimates for each piece in both veneer wood or high quality MDF material so I can compare pricing options - be able to to provide references from previous clients and share any other information about your work Thank you very much. - Due date: Before Tuesday, 5 July 2022

HI there, I've got a couple joinery works that need to be completed. what I need right now is couple of studs in a loft conversion for a walk-in wardrobe, eve storage and finish off some stud work for the en-suit. one floor joist adjustment of a skylight up-stand to make it smaller, as its currently too large. Amendment of a small cavity in the kitchen were the fridge will sit. the space is slightly too big so it needs to be shortened. job is ready to go as soon as, so please come out and see the job when you can, as its ready to go. - Due date: Before Monday, 18 April 2022

I have a couple of different tasks to complete around the house: - fit kitchen kick-boards to bottom of units - fit new skirting board (less than 4m) - fit step edging on 3 steps - nail down step threshold between hall and bathroom - fit integrated kitchen unit door to washing machine

Dear Airtasker : https://drive.google.com/drive/folders/12LQmJlbXMsEY8ln1daQLZ5BHgB2sNPUV?usp=sharing Photo 1: Plug needs buying and changing on the iron, please (total buying time for all goods maybe 1 hour? And 5 min to change the plug?) Photo 2 : PRIORITY: Please fix the bowing curtain rail (not sure if this is because the curtains are heavy and the rail is weak; if so, please buy and fix a new curtain rail (1 hour) Video 3 : Please see if there is a way to secure the handle of the window (if it can be done, maybe 30 mins?) Video 4: PRIORITY: Please secure the door handle however necessary. If the handle needs replacing on this door or any others, please buy and fix (if it can be done, maybe 30 mins?) Photo 5: PRIORITY: (photo to follow, a door that did close properly, now doesn’t) Wardrobe door is not closing properly, please adjust (30 min?) Photo 6: (photo to follow?) Bathroom door no longer closes easily (needs to be locked from inside to stay shut) because new, thicker carpet was laid. Is it possible to adjust or to shave the bottom of the door? Others: We are not sure if the door is supposed to flap up or not. Probably not, and if that is right, please secure it with screws at the bottom (10 minutes?) Door bell: PRIORITY: Judgment on what the best long-term solution is, be in contact with price, get agreement and install. - Due date: Flexible