Find an experienced builder in Melbourne City CBD

Looking for a draftsman to create a 1:100 scale floor plan for an office building. We have the original architectural footprint (can be provided) but need verification of the final build’s accuracy, including marking any tenant-added internal walls. The space covers one floor of approximately 172 square meters. Deliverables include: •1 x updated floor plan •Indication of ceiling height •Reflected ceiling plan focused on decorative lighting (no elevations needed)

Looking for someone to build two moveable wooden doors on frames that can be wheeled around for a theatre show. Doors need to open/close, be sturdy or they can't easily tip over yet moveable. Need someone to source materials, put a plan together for approval and construct. Happy to discuss costs.

4x4 wooden deck for my patio

I need 40sq concrete job done place and finish

Look for builder who inspect and put insulation back on the ceiling after water damaged restoration

Looking at constructing a new build for a home in seaford area. Please message with contact details for plans etc

I need a person to work with ongoing for concrete driveways.... I want to book a chat first. Must be licensed, insured, qualified, have all equipment for concrete driveways, concreting jobs, efficient, good communication & experience Drive to succeed and work. grow business.

I am planning to convert my garage into a Small Office Unit (SOU) with a bedroom and bathroom, located in Saint Albans, Melbourne. I seek your expertise to ensure compliance with the National Construction Code (NCC) and to navigate the permit process efficiently. Below, I've outlined the specifics of my project with attention to compliance requirements: 1. **Insulation**: To meet the NCC's energy efficiency provisions, particularly Section J for residential buildings, I intend to incorporate high-performance insulation in walls and ceilings, ensuring an optimal thermal performance rating. 2. **Plumbing**: The addition of a bathroom necessitates compliance with NCC Volume Three - Plumbing Code of Australia (PCA), focusing on water efficiency, sanitary drainage, and waterproofing requirements. 3. **Waterproofing**: Adhering to AS 3740 - Waterproofing of domestic wet areas, to prevent moisture damage and ensure the integrity of bathroom areas. 4. **Ceiling Height**: In alignment with NCC Building Code of Australia Volume Two, Part 3.8.2, the conversion will feature ceiling heights of at least 2.4 meters for more than two-thirds of the floor area, providing adequate headroom and ventilation. 5. **Windows and Natural Light**: Upgrading garage windows to double-glazed units to enhance thermal efficiency and sound insulation, adhering to the NCC's Part 3.8.5 requirement for natural light. The design will ensure window sizes meet at least 10% of the floor area, aligning with NCC Volume Two, Part 3.8.4 for natural lighting. 6. **Garage Door**: Considering the installation of a new garage door with integrated windows, to fulfill the NCC's natural light requirements while contemplating aesthetics and functionality. The design will ensure compliance with relevant Australian Standards for garage doors in residential applications, considering security, insulation, and operational safety.

Need an access the walkway. Demolition of the small wall partition in the corridor. To be removed and cleared away. Patch works to be done as well after demolition.

Need to build a partition wall with a door Location : Melbourne CBD Parking : Right infront of the building Unit : Apartment unit with easy lift access Wall size : approximately 5m with a door needed

Looking for a building surveyor to issue a permit (?). Our office wants to create a partition on a hallway that separates two rooms (floor plan as attached). I believe the hallway is a path to the emergency exit. Just want to know if : - It is possible to build a partition with a door lock on it? And if so, what are the requirements? - Do I need any approval or permits from the council to do this renovation?

cook,builder,and gardener - Due date: Flexible

Chat about demolition and your capabilities - Due date: Flexible

Demolition required by someone certified in demolition Job near bendigo Need demolition licence. Please confirm you have one when quoting Price listed is a placeholder and obviously please place your quote amount in the offer. If you can’t place your quote, then let me know and we can discuss by phone Need single story brick house with no roof to be taken down with the appropriate machinery, presumably an excavator. Roof has been destroyed after a fire. So as in the photos just with no roof. Bricks are still standing No clean up required. Should be a one/two day job Please ensure you have the appropriate license to do this job as I will ask you for details before it’s awarded/paid - Due date: Flexible

I need a quote first for rain heads and down pipes - Remove and dispose of the roof sheets above the damaged section of box gutter - Remove and dispose of up to 2m of degraded box gutter - Temporarily remove the flashing above the degraded gutter - Supply and install up to 2m of new box gutter in Color bond - Supply and install sizaltion paper above the new box gutter - Supply and install up to 10m2 of corrugated iron roof sheets above the new gutter in Color bond - Re fix up to 10 loose roof sheets - Remove and dispose of up to 6 rain heads - Supply and install up to 6 new Color bond rain heads - Cut in an overflow into each new Color bond rain head - Connect the existing down pipes to the newly installed Color bond rain heads - Remove and dispose of up to 5m of box gutter step down flashing - Supply and install up to 5m on new box gutter step down flashing in Color bond - Seal and secure all joins - Clean site from all job related rubbish- Due date: Flexible

I am looking for a draftsperson to come and measure a commercial space. I need plans drawn with existing fitouts with measurement. The drawn plans will be used to help us decide the cost of building works. The space is around 800 sqm and is in the CBD. - Due date: Flexible

SUPPLY & INSTALL SINGLE ROLLER DOOR ACROSS DRIVEWAY & VERTICAL BAR FENCE PANEL WITH PEDESTRIAN GATE PARALLEL WITH DRIVEWAY BETWEEN BUILDING & NEW ROLLER DOOR GETTING A QUOTE ON THIS JOB need a business with a proper insurance etc Single roller door about 3.2m Fence approx 3.2m + Gate 0.9m - Due date: Flexible

In need of new flyscreens for 5 windows. Measurements as per photo details. Location in Tullamarine. Flexible time.

We manufacture prefab steel structures. They come complete with manuals for assembly and even a personalised plan. Many customers do their own assembly. Many, however, want a capable person to deal with that. You should expect the job to take between 2 and 3 days although it will depend on size. Some jobs are larger and thus provide more secure income. - Due date: Flexible

For the restoration of the heritage ceiling, we need all of the calling details such as strip and cornice - Due date: Before Friday, 7 October 2022