Find an experienced handyman in Australia Square

Remove carpet from Bedroom 1, Bedroom 2, Hallway and Living Room. Total approx 35m2 carpet. Dispose of carpet. Build trapdoor to access under the house in Bedroom 2 and Dining Room. Patch small hole in bathroom ceiling. Patch small hole in wall made from front door lock. Reattach kitchen cabinet door with hinges (you may need to buy the correct ones if mine do not fit). Remove old grout in kitchen under splashback, lay new grout/silicon. Reattach fallen tile to wall. New hinges for bathroom cabinet as rusted. Fill wall cracks. Must dispose of all rubbish and clean up. Must bring own tools, ladder, materials (plaster, grout) etc.

i need someone to install this pet door (already purchased) in a glass sliding door https://www.petcircle.com.au/product/sureflap-microchip-pet-door not sure what this type of job would cost so please send through your quotes full manual for install can be found at surepetcare.com/pdf

I have a new shop sign, just need someone to screw it on. It's about 5m off the ground so will need a long ladder

The wood holding the floor of the seat has broken. The padding is fine, it’s just the wood under of the padding that needs to be swapped out.

I need a qualified persons to install a motorised folding arm awning - the awning is 3.5m wide and the wall it needs to go on 3m above the ground through timber structure. There are three brackets requiring furring to the timber structure. The awning just needs to be plugged into a PowerPoint. See pics

I need photographs and some artwork to hang on our walls. Its around 80 pieces in total and each picture needs string or wire attaching. We would need someone who has experience and the tools to make sure the pictures are secure enough to hang up.

Need a quote for the following items inside a brewery in Newtown. 1. Timber screening installation of a timber (presume merbau) screen onto existing chain link fence Dimensions below: 3500x4400mm 2200mm heigh Opening 900mm Corner layout with door access, quick sketch and photo attached. 2. Sand back one of the dining tables and seal to match other furniture inside. Dimensions 2400x900. 3. Remove and dispose of a corner shelf wrapping around bar splashback, fill holes afterwards. If you can invoice would be advantageous

Install dimmers + 2 x wall sconces above the bed 1.) We'd like dimmers placed on our house light switches (5 in total) 2.) We have two walls sconces that we'd like placed inside a (gyprock wall) architrave. Will need an electrician to do it. installation PDF here: https://img.zcdn.com.au/docresources/38080/21/212975.pdf

Step 1. Position latch of door guard on door frame and secure with screws provided. Step 2. Align door guard on door with latch and check the latch aligns when opening door. Step 3. Mark and drill screw holes of door guard and secure with screws provided. Step 4. Your security door guard is ready for use.

I have a few things I would love a hand with, ideally someone who can do it all and also bring the required supplies, I have written at the end what I assume those are and will obviously cover the cost. Hanging of some paintings 1 x really large canvas (about 1m x 1.5m) inside 2 x medium canvas (about 1m x 1m each) outside Repair outside cupboard - install chip rock wall to brick wall (new material needed) or alternatively shelves can go straight into brick if possible - reinstall exisiting shelves that were removed for water pipe repair work Cover Slanted Gap under driveway gate - build removable under sliding fence blocker on uneven slope, needs to be easily moved for use of gate Ceiling Patches - there is already putty on a few holes from draining out water, needs sanding and patch painting (already have paint, putty but not good sanding stuff). Wall patch - roughly 15cm x 15cm hole to be patched around a gas connection Ceiling Block and Paint - block water stain marks to treat - paint ceiling (small study only, paint provided) Assumption of materials needed - your own general tools - picture wire to hang paintings - sanding paper /block - chip rock and liquid nails - actual nails or screws - treated wood (for under gate) - your own tools I know it’s a random list of things so if you can’t do all that’s ok too! if it’s hard to quote without seeing the space we can just agree on price for straight forward items eg hang painting and then u can review the other tasks when your here and we can add new task for that. Thanks Sarah.

We are looking to install 8 hooks/pictures on brick rendered walls, as well as assistance installing blinds.

Fix 2 hinges. Might need to be reset. Screws long gone.

Door hinges have worn away and need to be replaced. Door is now hanging slightly loose at the top so it is catching and scraping on the frame when opened. Hinges will probably heed to be replaced and door re aligned and rehung.

Soft close drawer on bathroom vanity has broken. Drawer now stays open permanently. Need someone with experience in such a thing to fix it.

The bottom hinge on the bifold doors for our laundry has become unhinged before the wood has rotted from damp. We need the hinge to be moved further up.

We have a double storied wall, with a pitched ceiling that used to have a plant climbing up it - the plant was secured to the wall with screws. We’ve removed the plant and all the screws, but need to wall to be repaired and repainted. The screw holes need to be patched , and the whole wall needs to be cleaned, sanded and repainted. Notes: * At its highest, the wall is approx 8m * Paint will be supplied, but no other materials * We have an extendable ladder (7m at full extension approx)

Requiring the installation of 7 pictures in our house, to be drilled into brick and drywall.

The shelf under my sink is blocking me putting a regular sized bin underneath. It has been cut to size for the kitchen pipe to go through it but I can’t figure out how to either unscrew the pipe or cut the shelf away (without damaging the pipe)

Hi! I just bought a second hand 2019 Sony Bravia 75” tv and I had it on top of a skinny hall table. I’ve put it on the floor for now because it looked too precarious on the table, my cat was walking behind it and I was afraid of it falling over. I think it needs reinforcement from the wall behind. The wall is concrete. It’s an old terrace house in Newtown. I don’t have any of the walk mounting parts. I’d like it to still be on the table as well. Would love for it to be done this weekend :)

I would like to install a cat door to my bedroom. The bedroom door is wooden so requires a bit of sawing and then then cat door can be clipped on